PROCESSING OF REDUCED-BAND-GAP TITANIA FOR SOLAR-HYDROGEN. The present project involves the development of materials and devices for solar-hydrogen using photo-assisted water decomposition. The research focusses on the processing of titanium dioxide (titania) with substantially enhanced photo-sensitivity and, consequently, increased efficiency of the conversion of solar energy into chemical energy (hydrogen) through imposition of the optimal Ti/O ratio. Significance: processing technology of tit ....PROCESSING OF REDUCED-BAND-GAP TITANIA FOR SOLAR-HYDROGEN. The present project involves the development of materials and devices for solar-hydrogen using photo-assisted water decomposition. The research focusses on the processing of titanium dioxide (titania) with substantially enhanced photo-sensitivity and, consequently, increased efficiency of the conversion of solar energy into chemical energy (hydrogen) through imposition of the optimal Ti/O ratio. Significance: processing technology of titania for photo-electrochemical devices for hydrogen generation and water decontamination. Innovation: processing of titania with reduced band-gap to be achieved through optimised oxygen nonstoichiometry. Outcome: processing technology of titania with outstanding photo-sensitivity.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0453320
Funder
Australian Research Council
Funding Amount
$347,886.00
Summary
Advanced Spectroscopy for Nano-characterisation of Materials Chemistry and Properties. This application proposes to establish a cutting-edge spectroscopic facility which includes; electron energy-loss spectroscopy (EELS), energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), photoluminescence (PL) and micro-Raman spectroscopy. Each of the spectrometers to be installed has significantly higher sensitivity and resolution than any other facility available in Australia and is capable ....Advanced Spectroscopy for Nano-characterisation of Materials Chemistry and Properties. This application proposes to establish a cutting-edge spectroscopic facility which includes; electron energy-loss spectroscopy (EELS), energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), photoluminescence (PL) and micro-Raman spectroscopy. Each of the spectrometers to be installed has significantly higher sensitivity and resolution than any other facility available in Australia and is capable of full spectrum imaging. This new spectroscopic infrastructure will enable the knowledge-based development of new materials by allowing complete characterisation of structure-composition-property relationships at the nanometre level.Read moreRead less
Self-zoning in natural uraninite: radiation driven chemical separation. In this project we aim to explore and define the effects of the substitution of lead and rare earths on the crystal chemistry of uranium dioxide (uraninite) and related minerals, towards establishing the oxygen stoichiometry (as a measure of oxygen fugacity) of these materials both in nature and in synthetic materials. This project will use synthetic materials to understand the variability of oxygen stoichiometry, establish ....Self-zoning in natural uraninite: radiation driven chemical separation. In this project we aim to explore and define the effects of the substitution of lead and rare earths on the crystal chemistry of uranium dioxide (uraninite) and related minerals, towards establishing the oxygen stoichiometry (as a measure of oxygen fugacity) of these materials both in nature and in synthetic materials. This project will use synthetic materials to understand the variability of oxygen stoichiometry, establish accurate and precise structures for the oxides, and distinguish both long range and short-range order which is critical to understanding both natural and synthetic U-oxides. This will help to define the geochemical conditions leading to the formation of deposits like Olympic Dam towards potential economic benefit.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100236
Funder
Australian Research Council
Funding Amount
$180,000.00
Summary
Facilities for spectroscopy and diffraction at high pressures. The provision of infrastructure for the study of novel materials under high pressures will enhance Australia's capability in creating new materials and in creating new devices that meet needs in communication, environment and medicine applications. The new facility will enable researchers to understand the response of structures to extreme pressures and will exploit the unique capabilities of the synchrotron light.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0882246
Funder
Australian Research Council
Funding Amount
$750,000.00
Summary
Comprehensive Analysis Facility for Thin Films and Surfaces. The provision of infrastructure for the analysis of thin films will enhance Australia's capabilities in creating new materials and in creating new devices that meet needs in medicine, communications, the environment and security. As devices become smaller, sufaces and interfaces dominate their performance. The new facility will enable researchers to understand the structure and composition of the interior and interfaces of thin films a ....Comprehensive Analysis Facility for Thin Films and Surfaces. The provision of infrastructure for the analysis of thin films will enhance Australia's capabilities in creating new materials and in creating new devices that meet needs in medicine, communications, the environment and security. As devices become smaller, sufaces and interfaces dominate their performance. The new facility will enable researchers to understand the structure and composition of the interior and interfaces of thin films as well as mapping local variations in their key properties. Instruments with unique capabilities will measure elemental composition, crystallographic phase, defect and void distributions and spatially resolved stress, electrical, mechanical and magnetic properties.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100136
Funder
Australian Research Council
Funding Amount
$1,100,000.00
Summary
High Performance Solid State NMR Spectroscopy for Materials Research. The project will support research in a diverse set of fields such as biomedical engineering catalysis, energy storage and waste recovery, with cutting edge next-generation solid state (400 MHz) nuclear magnetic resonance capabilities and research expertise. The system enabling high sensitivity, high throughput analysis over extended temperature range will enable addressing of fundamental questions regarding the structure-prope ....High Performance Solid State NMR Spectroscopy for Materials Research. The project will support research in a diverse set of fields such as biomedical engineering catalysis, energy storage and waste recovery, with cutting edge next-generation solid state (400 MHz) nuclear magnetic resonance capabilities and research expertise. The system enabling high sensitivity, high throughput analysis over extended temperature range will enable addressing of fundamental questions regarding the structure-property relationships of advanced functional materials. Accessible to a wide user base in fundamental and applied research, in medicine, energy, catalysis and recycling of waste, the project will extend the current facilities to develop Sydney as regional centre for advanced solid state nuclear magnetic resonance analysis.Read moreRead less
Industrial Transformation Training Centres - Grant ID: IC190100034
Funder
Australian Research Council
Funding Amount
$3,574,272.00
Summary
ARC Training Centre for Green Chemistry in Manufacturing. Globally, there is demand for products that are effective, safe and environmentally benign. The ARC Training Centre for Green Chemistry in Manufacturing aims to utilise local and global experts to provide the next generation of Australian chemists and engineers, with skills to develop innovative products and processes that are intrinsically safe and benign. It will provide collaborating partners and the broader manufacturing industry with ....ARC Training Centre for Green Chemistry in Manufacturing. Globally, there is demand for products that are effective, safe and environmentally benign. The ARC Training Centre for Green Chemistry in Manufacturing aims to utilise local and global experts to provide the next generation of Australian chemists and engineers, with skills to develop innovative products and processes that are intrinsically safe and benign. It will provide collaborating partners and the broader manufacturing industry with new products and processes with strong export potential, and the ability to respond to the market pressures, underpinned by green chemistry and sustainable principles. Resulting benefits include increased competitiveness for Australia's manufacturing industry, jobs, social as well as environmental benefitsRead moreRead less
Industrial Transformation Research Hubs - Grant ID: IH230100011
Funder
Australian Research Council
Funding Amount
$4,955,854.00
Summary
ARC Research Hub for Value-Added Processing of Underutilised Carbon Waste. This Hub aims to advance upcycling technologies and associated regulatory and social engagement for processing underutilised carbon waste within Australia. Its anticipated goal is to deliver value-added products, and improved technology readiness levels for full exploitation of carbon wastes from agriculture, tyres and plastics. It will also train a large talent pool providing interdisciplinary knowledge and entrepreneuri ....ARC Research Hub for Value-Added Processing of Underutilised Carbon Waste. This Hub aims to advance upcycling technologies and associated regulatory and social engagement for processing underutilised carbon waste within Australia. Its anticipated goal is to deliver value-added products, and improved technology readiness levels for full exploitation of carbon wastes from agriculture, tyres and plastics. It will also train a large talent pool providing interdisciplinary knowledge and entrepreneurial skills for post-hub commercialisation. The Hub will benefit rural Australia by transforming local job markets and manufacturing capability. Ultimately, this Hub will make a significant contribution towards achieving Australia’s National Waste Action Plan goal by 2030, and a circular economy for a sustainable future. Read moreRead less
Urban biochar: towards prescriptive biochar use for maximum economic productivity and sustainability benefits in urban environments. This project will develop a life cycle assessment of waste management options for green waste and biosolids based on a clear understanding of productivity benefits of urban biochar application to high value production systems.