Improved analysis techniques for seismic assessment of unreinforced masonry buildings with flexible floor/roof diaphragms. A major international collaboration between researchers in Australia, New Zealand and Italy is underway to develop a method for structural engineers to determine which masonry buildings post a significant hazard to the public in the event of an earthquake such as that which struck the city of Christchurch.
Safeguarding Australia’s heritage masonry buildings from earthquake attack. The project aims to improve the guidance provided in Australian and New Zealand design codes for the seismic capacity assessment of heritage masonry buildings. The majority of culturally significant heritage buildings in Australia are constructed of unreinforced masonry, and all of these buildings were erected before seismic design guidelines or requirements existed. The risk posed by earthquakes to these important build ....Safeguarding Australia’s heritage masonry buildings from earthquake attack. The project aims to improve the guidance provided in Australian and New Zealand design codes for the seismic capacity assessment of heritage masonry buildings. The majority of culturally significant heritage buildings in Australia are constructed of unreinforced masonry, and all of these buildings were erected before seismic design guidelines or requirements existed. The risk posed by earthquakes to these important buildings is significant – as highlighted by the 2011 Christchurch earthquake where both major cathedrals in the city were heavily damaged. The project aims to develop an analysis and design method that accounts for the material properties and non-typical structural layouts used in heritage stone and clay brick masonry buildings that are most relevant to seismic response.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE130100089
Funder
Australian Research Council
Funding Amount
$500,000.00
Summary
Performance level structural testing facility. A structural testing facility is proposed for the new Advanced Engineering Building at The University of Queensland. The focus of the research supported by this facility will ensure the functionality of Australia’s infrastructure resources and the development of new engineering solutions that will enhance the country’s long-term economic growth.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100011
Funder
Australian Research Council
Funding Amount
$700,000.00
Summary
The national geotechnical centrifuge facility. A new geotechnical centrifuge will enable the modelling of complex offshore and onshore structures. The new facility will support many geotechnical fields, associated with the economical and geographical development of Australia, and ensure that Australia will maintain its leadership within the international physical modelling community.
On-line monitoring of cyanobacteria to predict coagulant doses and powdered activated carbon application in water treatment. Cyanobacteria, more commonly known as blue-green algae, can impact water quality by releasing toxins that can be harmful to human health and imparting unpleasant taste and odours to the water. This project will support the water industry in managing these risks by providing a rapid, on-line tool to assist in their removal during water treatment.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE150100058
Funder
Australian Research Council
Funding Amount
$560,000.00
Summary
Three dimensionally compressed and monitored Hopkinson bar . 3D compressed and monitored Hopkinson bar: The 3D compressed and monitored Hopkinson bar allows determination of the dynamic mechanical properties and fracturing behaviour of materials under such confinement. Understanding material behaviour under dynamic loading is essential in dealing with many engineering problems as excavation, fragmentation, earthquake, blasting, and structure design. In geotechnical and structure projects, materi ....Three dimensionally compressed and monitored Hopkinson bar . 3D compressed and monitored Hopkinson bar: The 3D compressed and monitored Hopkinson bar allows determination of the dynamic mechanical properties and fracturing behaviour of materials under such confinement. Understanding material behaviour under dynamic loading is essential in dealing with many engineering problems as excavation, fragmentation, earthquake, blasting, and structure design. In geotechnical and structure projects, materials are often subjected to existing confining stresses. The full-field optical techniques, with an ultra-high speed and resolution camera in the system, aims to assist the quantitative measurement of deformation fields including small strain induced in brittle material's failure and identification of constitutive parameters.Read moreRead less
Robust streamflow predictions by improving the identification of hydrological model structure. This project aims to provide Australian environmental agencies, design engineers and policy-makers with robust methods that better utilise observed environmental data and process understanding to produce hydrological models with stronger scientific basis and improved operational predictive ability in gauged and ungauged catchments.
Structural Fuses for Safer and More Economical Bridge Construction. This project aims to develop a novel structural system leading to more economical concrete bridge construction by utilising a customised structural fuse. A significant margin of safety is required in structural design to account for accidental over-loading and to reduce the risk of structural collapse. Such a margin leads to more material usage. Incorporation of a fuse into the structure that is triggered upon over-loading will ....Structural Fuses for Safer and More Economical Bridge Construction. This project aims to develop a novel structural system leading to more economical concrete bridge construction by utilising a customised structural fuse. A significant margin of safety is required in structural design to account for accidental over-loading and to reduce the risk of structural collapse. Such a margin leads to more material usage. Incorporation of a fuse into the structure that is triggered upon over-loading will cause a safer failure mode and prohibit further increase of loading, both of which result in a reduced structure without undermining safety. The project is expected to advance structural theory, and also provide significant benefits to the construction industry via cost reduction and more eco-friendly constructions.Read moreRead less
Laser Ultrasonic Health Monitoring for Australia’s Infrastructure Assets. This project aims to develop technologies to monitor the health of Australia’s ageing infrastructure with the use of a unique laser ultrasonic device. The laser device will be used to conduct experiments that are expected to develop a set of techniques for monitoring the critical areas of structures with most frequently observed ageing problems. Precise estimates of damage will be made by processing signals from a combinat ....Laser Ultrasonic Health Monitoring for Australia’s Infrastructure Assets. This project aims to develop technologies to monitor the health of Australia’s ageing infrastructure with the use of a unique laser ultrasonic device. The laser device will be used to conduct experiments that are expected to develop a set of techniques for monitoring the critical areas of structures with most frequently observed ageing problems. Precise estimates of damage will be made by processing signals from a combination of simulation and experimental modelling. Feedback from the user community is expected to further improve the techniques.Read moreRead less
Geopolymer concrete for thin-walled structures in marine environment. This project aims to develop ultra-high performance geopolymer concrete thin-walled structures for the critical infrastructure in the marine environment. It is expected that this project will develop novel design rules for ultra-high performance geopolymer concrete thin-walled structures based on experimental testing, numerical modelling, validation, and simulation. This project is expected to increase the durability of coasta ....Geopolymer concrete for thin-walled structures in marine environment. This project aims to develop ultra-high performance geopolymer concrete thin-walled structures for the critical infrastructure in the marine environment. It is expected that this project will develop novel design rules for ultra-high performance geopolymer concrete thin-walled structures based on experimental testing, numerical modelling, validation, and simulation. This project is expected to increase the durability of coastal infrastructures and significantly reduce the loss of their capacities due to corrosion-induced damage. The development of ultra-high performance geopolymer concrete thin-walled structures is a significant engineering discovery, which is in line with the Australian government 2030 vision for sustainable development.Read moreRead less