Enabling three dimensional stochastic geological modelling. This project aims to develop technologies to mitigate three dimensional (3D) geological risk in resources management. This project expects to create new knowledge and methods in the field of 3D geological modelling through the innovative application of mathematical methods, structural geology concepts and probabilistic programming. The expected outcomes are an enhanced capability to model the subsurface, characterise model uncertainty a ....Enabling three dimensional stochastic geological modelling. This project aims to develop technologies to mitigate three dimensional (3D) geological risk in resources management. This project expects to create new knowledge and methods in the field of 3D geological modelling through the innovative application of mathematical methods, structural geology concepts and probabilistic programming. The expected outcomes are an enhanced capability to model the subsurface, characterise model uncertainty and test multiple geological scenarios. This enhanced capability is important for the future of Australia's subsurface management, including urban geology and our continuously growing sustainable resources industry.Read moreRead less
Electronic and Optical Properties of Doped Titanium Dioxide. Titanium dioxide, is widely used as a white pigment, owing to its high refractive index, second, only after diamond. Yellowing of rutile pigment particles, observed on prolonged exposure to sunlight, is a serious problem that pigment manufacturers would like to overcome. It is proposed that aluminium-doping of rutile limits this discolouration by altering the electronic structure of the rutile particles. This project seeks to identify ....Electronic and Optical Properties of Doped Titanium Dioxide. Titanium dioxide, is widely used as a white pigment, owing to its high refractive index, second, only after diamond. Yellowing of rutile pigment particles, observed on prolonged exposure to sunlight, is a serious problem that pigment manufacturers would like to overcome. It is proposed that aluminium-doping of rutile limits this discolouration by altering the electronic structure of the rutile particles. This project seeks to identify the specific electronic cause of the yellowing process, the nature of the Al defect,it's effect on the electronic structure of rutile, and the electronic perturbations that may occur when other dopants are used.Read moreRead less
PROBABILISTIC BRIDGE STRUCTURE CONDITION ASSESSMENT AND LOAD CARRYING CAPACITY PREDICTION. Bridge failures have occasionally been reported around the world. Condition assessment of bridges is vital to maintain their safety. It is difficult to assess quantitatively the deterioration and damage using traditional methods. Vibration-based methods are very sensitive to noise in vibration measurement and error in finite element modelling. This project will study the effects of measurement noises and f ....PROBABILISTIC BRIDGE STRUCTURE CONDITION ASSESSMENT AND LOAD CARRYING CAPACITY PREDICTION. Bridge failures have occasionally been reported around the world. Condition assessment of bridges is vital to maintain their safety. It is difficult to assess quantitatively the deterioration and damage using traditional methods. Vibration-based methods are very sensitive to noise in vibration measurement and error in finite element modelling. This project will study the effects of measurement noises and finite element model errors on bridge condition assessment, and develop improved techniques for predicting load carrying capacities of bridges. The technique developed will be applied to Main Roads WA bridges, will also be applicable to the assessment of other types of structures.Read moreRead less
Three-dimensional Bayesian Modelling of Geological and Geophysical data. The project aims to develop technologies enabling rapid informed decision-making related to the management of natural resources, including critical metals, copper and water. This new technology will support a greener future, securing our energy future, our access to clean water and reduce the mining footprint. Expected outcomes include an enhanced capability in interoperable, integrated three-dimensional geological and geop ....Three-dimensional Bayesian Modelling of Geological and Geophysical data. The project aims to develop technologies enabling rapid informed decision-making related to the management of natural resources, including critical metals, copper and water. This new technology will support a greener future, securing our energy future, our access to clean water and reduce the mining footprint. Expected outcomes include an enhanced capability in interoperable, integrated three-dimensional geological and geophysical modelling in order to predictively characterise sub-surface geology. The outcome will be an open-source forecasting dashboard enabling decision making while considering underlying risk related to resource extractions and management with significant benefits to the Australian society (lower emissions, clean water).Read moreRead less
Better Batteries via Controlling the Properties of Electrolytic Manganese Dioxide. Physical properties of electrolytic manganese dioxide (EMD) such as crystal structure, morphology and electrochemical characteristics determine its usefulness in alkaline batteries. However, the relationship between these parameters is not well understood. This APAI project will attempt to address these shortcomings in the current understanding of the production process by focussing on the relationships between fu ....Better Batteries via Controlling the Properties of Electrolytic Manganese Dioxide. Physical properties of electrolytic manganese dioxide (EMD) such as crystal structure, morphology and electrochemical characteristics determine its usefulness in alkaline batteries. However, the relationship between these parameters is not well understood. This APAI project will attempt to address these shortcomings in the current understanding of the production process by focussing on the relationships between fundamental physical, chemical and electrochemical properties of EMD. The results will be of benefit in optimising the process and ensuring that EMD with superior performance can be consistently produced.Read moreRead less
Assessment of structural integrity and deterioration of masonry walls. Brickwork for housing and medium-rise buildings is a traditional material, also much used for modern construction, with aesthetic appeal and modest cost. However, building regulators and others are increasingly concerned about evidence of slow building deterioration, particularly of older buildings. This increases public safety risks, even under normal conditions and more so under high winds or earthquake-induced ground-shaki ....Assessment of structural integrity and deterioration of masonry walls. Brickwork for housing and medium-rise buildings is a traditional material, also much used for modern construction, with aesthetic appeal and modest cost. However, building regulators and others are increasingly concerned about evidence of slow building deterioration, particularly of older buildings. This increases public safety risks, even under normal conditions and more so under high winds or earthquake-induced ground-shaking. This project will help address this issue. It will obtain unbiased evidence of typical masonry building deterioration. It will couple this with mathematical modelling and state-of-the-art non-destructive visual and dynamic techniques to develop tools for making fast, low-cost practical building risk assessments.Read moreRead less
Integrating Stress and Strain Data from the North West Shelf, Australia: Implications for Hydrocarbon Seal Integrity. Many exploration wells in the Australian North West Shelf encounter residual columns from which hydrocarbons have leaked due to fault reactivation. Recently there has been a significant increase in our knowledge of contemporary stress (from data such as borehole breakouts)
and strain (from fault reactivation styles) on the North West Shelf.
This project will integrate informati ....Integrating Stress and Strain Data from the North West Shelf, Australia: Implications for Hydrocarbon Seal Integrity. Many exploration wells in the Australian North West Shelf encounter residual columns from which hydrocarbons have leaked due to fault reactivation. Recently there has been a significant increase in our knowledge of contemporary stress (from data such as borehole breakouts)
and strain (from fault reactivation styles) on the North West Shelf.
This project will integrate information on stress and strain in order to investigate whether the current state-of-stress is consistent with
observed reactivation styles, and thus develop predictive models for
fault reactivation and hydrocarbon leakage based on the distribution of
stress and strain.Read moreRead less
Analysis and design of interlocking brick system against earthquake loading. This project aims to develop optimised interlocking bricks to resist static and earthquake loads. Using conventional bricks in masonry construction requires skilled labour to connect bricks with mortar. Development of interlocking bricks for mortarless connection has been attracting great interest because the easy alignment improves construction efficiency and quality. Interlocking also leads to better mechanical perfor ....Analysis and design of interlocking brick system against earthquake loading. This project aims to develop optimised interlocking bricks to resist static and earthquake loads. Using conventional bricks in masonry construction requires skilled labour to connect bricks with mortar. Development of interlocking bricks for mortarless connection has been attracting great interest because the easy alignment improves construction efficiency and quality. Interlocking also leads to better mechanical performance of the resulting structures. This project will have significant impact on construction technology and the Australian masonry industry, and greatly improve the competitiveness of the Australian construction industry in the international market.Read moreRead less
The neo- and seismo-tectonics of northwestern Australia. Australia's two largest earthquakes occurred in NW Australia (magnitudes 7 and 7.9 in 1941 and 1906). Onshore and offshore geologic evidence indicates other such events in recent geological history. Our present seismic database records no such events. We propose to document the nature, frequency, intensity, distribution and possible causes of seismicity in NW Australia, through deployment of seismograph arrays. We will test the effects ....The neo- and seismo-tectonics of northwestern Australia. Australia's two largest earthquakes occurred in NW Australia (magnitudes 7 and 7.9 in 1941 and 1906). Onshore and offshore geologic evidence indicates other such events in recent geological history. Our present seismic database records no such events. We propose to document the nature, frequency, intensity, distribution and possible causes of seismicity in NW Australia, through deployment of seismograph arrays. We will test the effects of basement reactivation, determine the crustal structure beneath the cratonic mass, examine onshore and offshore faults, determine local and regional stress orientations and investigate implications for petroleum production in the region, and whether natural resource extraction causes local seismicity.Read moreRead less
Advancing the Australian specialty alloy processing capability. This project aims to advance Australia’s specialty alloy processing capability by developing novel processing routes to overcome current bottlenecks that prevent supply meeting demand. New knowledge will be generated on alternative means of the processing of Rene 41, a Nickel-based superalloy with limited formability through a comprehensive experimental and modelling-based research program. Rene 41 is strategically important for man ....Advancing the Australian specialty alloy processing capability. This project aims to advance Australia’s specialty alloy processing capability by developing novel processing routes to overcome current bottlenecks that prevent supply meeting demand. New knowledge will be generated on alternative means of the processing of Rene 41, a Nickel-based superalloy with limited formability through a comprehensive experimental and modelling-based research program. Rene 41 is strategically important for manufacturing next generation turbofan engines. The expected outcome is the identification of innovative processing routes to provide stronger, defect-free specialty alloys for aerospace applications, vital to Australia’s advanced manufacturing.Read moreRead less