Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0882725
Funder
Australian Research Council
Funding Amount
$1,000,000.00
Summary
Access for Australian Researchers to Advanced Neutron Beam Techniques. The major national benefit will be access, by peer review, to the 35 specialised instruments at the world's leading pulsed Neutron and Muon source, ISIS. This complements the access to the eight neutron instruments that will operate at the Australian Reactor OPAL. This will support (or enable) high quality research into areas as diverse as materials development, mineral processing and aspects of biological and medical scien ....Access for Australian Researchers to Advanced Neutron Beam Techniques. The major national benefit will be access, by peer review, to the 35 specialised instruments at the world's leading pulsed Neutron and Muon source, ISIS. This complements the access to the eight neutron instruments that will operate at the Australian Reactor OPAL. This will support (or enable) high quality research into areas as diverse as materials development, mineral processing and aspects of biological and medical science. It will facilitate international collaborations that are important for both research and post-graduate student training.Read moreRead less
Vapour phase detection of chemical warfare agents. This project aims to create luminescent plastic optoelectronic materials that can detect airborne chemical warfare agents, particularly nerve agents. Such agents are often odourless and invisible at lethal concentrations, so technology must detect and identify them before exposure. The intended outcomes are design rules for sensitive and selective materials that can be used in a handheld infield detector to sense chemical warfare agents based on ....Vapour phase detection of chemical warfare agents. This project aims to create luminescent plastic optoelectronic materials that can detect airborne chemical warfare agents, particularly nerve agents. Such agents are often odourless and invisible at lethal concentrations, so technology must detect and identify them before exposure. The intended outcomes are design rules for sensitive and selective materials that can be used in a handheld infield detector to sense chemical warfare agents based on the materials’ photophysical properties, and new analytical methods and sensing protocols. This research will be of interest to security agencies in Australia and internationally, and will better protect our military.Read moreRead less
Low cost aqueous rechargeable zinc batteries for grid-scale energy storage. This project aims to advance energy storage technology by developing high energy aqueous rechargeable zinc batteries, which are the most promising choice for large-scale electrical energy storage, in particular for smart electric grids, owing to their low cost, high safety, and eco-friendly features. The success of this project will advance our fundamental understanding of aqueous rechargeable batteries, provide techniqu ....Low cost aqueous rechargeable zinc batteries for grid-scale energy storage. This project aims to advance energy storage technology by developing high energy aqueous rechargeable zinc batteries, which are the most promising choice for large-scale electrical energy storage, in particular for smart electric grids, owing to their low cost, high safety, and eco-friendly features. The success of this project will advance our fundamental understanding of aqueous rechargeable batteries, provide techniques for the development of a low-cost, high energy, and long life system for renewable energy storage, and benefit Australia's environment, economy, and sustainability.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE180100129
Funder
Australian Research Council
Funding Amount
$425,200.00
Summary
Atomic layer nanofabrication system for multi-functional applications. This project aims to establish a multifunctional atomic layer nanofabrication facility in Sydney with the capacity to provide services nation-wide. The facility has powerful capabilities to produce mono-atom thin films, nanosize powders and two-dimensional nanostructures of a variety of materials, including elemental metals, metal oxides, metal nitrides, metal sulfides, metal-metal compounds, and polymers. This will significa ....Atomic layer nanofabrication system for multi-functional applications. This project aims to establish a multifunctional atomic layer nanofabrication facility in Sydney with the capacity to provide services nation-wide. The facility has powerful capabilities to produce mono-atom thin films, nanosize powders and two-dimensional nanostructures of a variety of materials, including elemental metals, metal oxides, metal nitrides, metal sulfides, metal-metal compounds, and polymers. This will significantly enhance Australian research and industrial activities in the areas of renewable energy production and storage, microelectronics, chemical and bio-sensors, protective coatings, flexible electronic devices, and catalysis.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100137
Funder
Australian Research Council
Funding Amount
$358,275.00
Summary
Integrated thin film facility for catalysis and energy materials research. This project aims to establish thin film fabrication with catalytic/gas sorption characterisation needed for energy research. This project will overcome current limitations in advanced energy materials design via wet chemical methods. It will enable materials synthesis and characterisation toward thermal/photo/electro-catalytic, hydrogen storage, and battery technologies. The facility is expected to drive fundamental conc ....Integrated thin film facility for catalysis and energy materials research. This project aims to establish thin film fabrication with catalytic/gas sorption characterisation needed for energy research. This project will overcome current limitations in advanced energy materials design via wet chemical methods. It will enable materials synthesis and characterisation toward thermal/photo/electro-catalytic, hydrogen storage, and battery technologies. The facility is expected to drive fundamental concepts, and enable combinatorial search and new thin film technology. It is anticipated that this facility will increase Australia’s international competitiveness in the development of advanced energy materials.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE170101069
Funder
Australian Research Council
Funding Amount
$360,000.00
Summary
Two-dimensional inorganic nanostructures for hydrogen evolution reaction. This project aims to synthesise highly active electrochemical catalysts of two-dimensional (2D) inorganic nanostructure for hydrogen evolution reaction (HER). The electrocatalysis of water to produce hydrogen gas could generate clean energy, but the platinum catalyst’s cost and low activity make it impractical. This project will develop 2D inorganic nanosheets with tuneable pores and electronic band structures, hybridised ....Two-dimensional inorganic nanostructures for hydrogen evolution reaction. This project aims to synthesise highly active electrochemical catalysts of two-dimensional (2D) inorganic nanostructure for hydrogen evolution reaction (HER). The electrocatalysis of water to produce hydrogen gas could generate clean energy, but the platinum catalyst’s cost and low activity make it impractical. This project will develop 2D inorganic nanosheets with tuneable pores and electronic band structures, hybridised with organic and/or inorganic semiconductor nanomaterials for HER, and use density functional theory calculation to investigate these hybridised nanosheets’ mechanisms for HER. These highly efficient and low-cost catalysts are expected to generate clean energy and create opportunities for Australian industries.Read moreRead less
An account of wetting phenomena on nano-engineered surfaces. This project aims to provide researchers and industry with a toolbox to predict wetting behaviour on surfaces with nanoscale topography. A combined experimental and numerical study will lead to the discovery of the mechanisms by which topographical and chemical properties of the surface trigger the formation of nanostructure-induced air pockets and how these phenomena determine surface wettability. This will provide significant benefi ....An account of wetting phenomena on nano-engineered surfaces. This project aims to provide researchers and industry with a toolbox to predict wetting behaviour on surfaces with nanoscale topography. A combined experimental and numerical study will lead to the discovery of the mechanisms by which topographical and chemical properties of the surface trigger the formation of nanostructure-induced air pockets and how these phenomena determine surface wettability. This will provide significant benefits, as the predictive surface-wettability model will enhance controllability and productivity of diverse manufacturing processes and lead to new applications, high-value products and economic benefits in mining, energy, electronics, biomedicine and other fields.Read moreRead less
Nanostructured non-precious metal and metal-free catalysts for sustainable clean energy generation. The innovative technologies for substitution of precious metal catalysts will be developed and used in fuel cells for clean energy generation in a highly efficient and sustainable form. This effort will lead to the reduction in carbon dioxide emissions and the alleviation of environmental and climate change problems.
The development of flexible, graded plasma surface engineered coatings for superior interfacial performance. The next generation of intraocular lenses, medical devices to treat patients with cataracts, will be developed through application of advanced surface engineering technologies. These superior coated lenses will improve biocompatibility and function, leading to additional benefit for the forecasted 2.7 million Australians with cataracts by 2021.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE140100042
Funder
Australian Research Council
Funding Amount
$190,000.00
Summary
UV to mid-infrared fluorescence spectrometer for use in mineral analysis, radiation dosimetry, and laser materials characterisation. Ultraviolet to mid-infrared fluorescence spectrometer for use in mineral analysis, radiation dosimetry and laser materials characterisation: This project will provide equipment with a vast capability to collect ultraviolet to mid-infrared fluorescence with high temporal measurement accuracy, and highly flexible excitation (spectral and temporal). This will enhance ....UV to mid-infrared fluorescence spectrometer for use in mineral analysis, radiation dosimetry, and laser materials characterisation. Ultraviolet to mid-infrared fluorescence spectrometer for use in mineral analysis, radiation dosimetry and laser materials characterisation: This project will provide equipment with a vast capability to collect ultraviolet to mid-infrared fluorescence with high temporal measurement accuracy, and highly flexible excitation (spectral and temporal). This will enhance active research into new glasses and laser crystals, probing of defect states resulting from ionising radiation absorption in environmental and medical dosimetry materials, investigation of novel fluorescence techniques for mineral identification, through to improving chemical detection capability (for example, detection of explosives). The instrument comprises modules that enable excitation in the ultraviolet, visible, and infrared from a tunable laser system, and high-efficiency collection and processing of fluorescence spectra.Read moreRead less