Scalable and Applicable Nanostructured Adsorbents for Arsenic Removal with High Performance. Arsenic contamination in groundwater and drinking water affects over 100 million people worldwide and causes severe health problems. This project aims to use a recently patented technology to develop a new generation of adsorbents with controlled nanostructure and morphology for arsenic removal. The novel low-cost adsorbents are expected to have superior performance for the treatment of water containing ....Scalable and Applicable Nanostructured Adsorbents for Arsenic Removal with High Performance. Arsenic contamination in groundwater and drinking water affects over 100 million people worldwide and causes severe health problems. This project aims to use a recently patented technology to develop a new generation of adsorbents with controlled nanostructure and morphology for arsenic removal. The novel low-cost adsorbents are expected to have superior performance for the treatment of water containing arsenic at both high and low concentrations. The engineered products will be tested in high-throughput wastewater treatment in pharmaceutical factories and as a household drinking water treatment device. This project aims to bring economic and social benefits to Australian industry and improve the quality of life for people all over the world.Read moreRead less
Carbon nanotube fluidic channels for desalination - interplay of nanoscale confinement and electrostatics. Tiny tubes of carbon, ten thousand times smaller than human hair, allow water to pass through at extraordinary speed. This project aims to understand and improve their salt rejection properties using comprehensive experimental and theoretical approaches. This will provide the impetus and knowledge for developing advanced membranes for desalination
Transistor-based sensor technology for fast, reliable and accurate in situ monitoring of recycled wastewater. Water recycling is becoming critical for water supplies worldwide, due to declining natural supplies of fresh water, combined with increasing demand. The greatest community and industry concerns over recycled water are quality assurance and relative cost. Ensuring quality requires monitoring of contaminants, yet no single real-time technology exists to measure the myriad of potential con ....Transistor-based sensor technology for fast, reliable and accurate in situ monitoring of recycled wastewater. Water recycling is becoming critical for water supplies worldwide, due to declining natural supplies of fresh water, combined with increasing demand. The greatest community and industry concerns over recycled water are quality assurance and relative cost. Ensuring quality requires monitoring of contaminants, yet no single real-time technology exists to measure the myriad of potential contaminants. This project will develop technology using AlGaN/GaN-based transistors, sensitised to different contaminants, enabling multi-analyte real-time sensor arrays. In situ monitoring systems based on such arrays will be fast, accurate, reliable, low-cost, and applicable to a broad variety of water recycling projects.Read moreRead less
Vapour phase detection of chemical warfare agents. This project aims to create luminescent plastic optoelectronic materials that can detect airborne chemical warfare agents, particularly nerve agents. Such agents are often odourless and invisible at lethal concentrations, so technology must detect and identify them before exposure. The intended outcomes are design rules for sensitive and selective materials that can be used in a handheld infield detector to sense chemical warfare agents based on ....Vapour phase detection of chemical warfare agents. This project aims to create luminescent plastic optoelectronic materials that can detect airborne chemical warfare agents, particularly nerve agents. Such agents are often odourless and invisible at lethal concentrations, so technology must detect and identify them before exposure. The intended outcomes are design rules for sensitive and selective materials that can be used in a handheld infield detector to sense chemical warfare agents based on the materials’ photophysical properties, and new analytical methods and sensing protocols. This research will be of interest to security agencies in Australia and internationally, and will better protect our military.Read moreRead less
Doped alumina with tailored material properties for battery applications. This project aims to develop tailored alumina materials for lithium ion battery separators through a novel in-situ approach that will: (1) produce uniform doped alumina for improved safety, (2) target specific surface and bulk material properties to increase the overall performance, and (3) reduce manufacturing costs by integrating the process with new technology developed for the production of high purity alumina. Signifi ....Doped alumina with tailored material properties for battery applications. This project aims to develop tailored alumina materials for lithium ion battery separators through a novel in-situ approach that will: (1) produce uniform doped alumina for improved safety, (2) target specific surface and bulk material properties to increase the overall performance, and (3) reduce manufacturing costs by integrating the process with new technology developed for the production of high purity alumina. Significant advances are proposed for overcoming current manufacturing limitations of doped alumina. Building research capacity and knowledge in battery material manufacturing will benefit a range of industries across Australia, whilst providing new opportunities for growth in local communities.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100235
Funder
Australian Research Council
Funding Amount
$388,000.00
Summary
Spectroscopy and imaging platform for photoactive materials. This project aims to establish a comprehensive analytic tool-box to characterise solution-processable materials for thin-film solar cells based on materials such as perovskites. These materials have light harvesting properties with absorption edges beyond 800 nm. This project will focus on time-resolved transient absorption and microwave conductivity phenomena and on lock-in thermographic imaging capabilities. This will accelerate mate ....Spectroscopy and imaging platform for photoactive materials. This project aims to establish a comprehensive analytic tool-box to characterise solution-processable materials for thin-film solar cells based on materials such as perovskites. These materials have light harvesting properties with absorption edges beyond 800 nm. This project will focus on time-resolved transient absorption and microwave conductivity phenomena and on lock-in thermographic imaging capabilities. This will accelerate materials and technological development in this research field. This project is expected to help the local and global energy sector transition to sustainable energy, provide a competitive edge for commercialisations of solar technologies in Australia, and benefit the economy, environment and national security.Read moreRead less
Hybrid photocatalytic nanomaterials for water purification. This project aims to synthesise and characterise a range of porous photocatalytic materials (materials that absorb light to catalyse a reaction), and to establish high-throughput processes to simultaneously test the effectiveness of multiple photocatalytic materials. This interdisciplinary project expects to develop two new techniques that will lead to faster materials optimisation of materials that breakdown organic pollutants in water ....Hybrid photocatalytic nanomaterials for water purification. This project aims to synthesise and characterise a range of porous photocatalytic materials (materials that absorb light to catalyse a reaction), and to establish high-throughput processes to simultaneously test the effectiveness of multiple photocatalytic materials. This interdisciplinary project expects to develop two new techniques that will lead to faster materials optimisation of materials that breakdown organic pollutants in water under light irradiation. The intended outcomes include the production of industrially relevant photocatalysts and building capability in Australia to decrease photocatalytic testing time and cost. This should provide significant benefits to industry and the environment, and have an impact on human health.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE200101156
Funder
Australian Research Council
Funding Amount
$426,476.00
Summary
Preconcentrators for vapour detection of explosive material. This Project’s aim is to develop a preconcentrator technology for the in-field detection of explosive vapours that have low concentrations in air. Low explosive vapour concentration limits the efficacy of portable detectors. Current preconcentrator technologies sorb vapours but require heat to release the concentrated material limiting their use to non-portable detectors. This project is expected to deliver materials and a device modul ....Preconcentrators for vapour detection of explosive material. This Project’s aim is to develop a preconcentrator technology for the in-field detection of explosive vapours that have low concentrations in air. Low explosive vapour concentration limits the efficacy of portable detectors. Current preconcentrator technologies sorb vapours but require heat to release the concentrated material limiting their use to non-portable detectors. This project is expected to deliver materials and a device module for a preconcentrator technology that will sorb explosive analytes, have low power requirements and be compatible with hand held explosives detectors. Security and law enforcement agencies should directly benefit from these findings, which would advance their safety and that of the community as a whole.Read moreRead less
Bioinspired Ion Transporters for Efficient Energy Conversion and Storage. This project aims to fabricate bioinspired light-driven ion transporters with biological-level active ion transport efficiency for efficient energy conversion and storage. Engineering of artificial membranes with ion-pump-like pore structures, specific ion binding sites and photo-excited molecular gates by an innovative bioinspired approach is expected to generate new knowledge in the field of biomimetic design of artifici ....Bioinspired Ion Transporters for Efficient Energy Conversion and Storage. This project aims to fabricate bioinspired light-driven ion transporters with biological-level active ion transport efficiency for efficient energy conversion and storage. Engineering of artificial membranes with ion-pump-like pore structures, specific ion binding sites and photo-excited molecular gates by an innovative bioinspired approach is expected to generate new knowledge in the field of biomimetic design of artificial ion-transporter membranes and bring new technologies to applications such as in solar energy harvesting, osmotic power generation, ionic batteries, and ionic circuits. The proposed research should provide significant benefits such as new energy conversion and storage technologies for Australian manufacturing industry.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE180100109
Funder
Australian Research Council
Funding Amount
$832,648.00
Summary
Magneto-optical facility for the search of novel multifunctional materials. This project aims to establish a comprehensive photomagnetic materials characterisation facility. Novel transition metal oxide materials provide new functionalities, which by far exceed present semiconductor and IT technology. The project will enable new observations of materials’ behaviour by combining Superconducting Quantum Interference Device (SQUID) magnetometry with optical illumination, under systematically contro ....Magneto-optical facility for the search of novel multifunctional materials. This project aims to establish a comprehensive photomagnetic materials characterisation facility. Novel transition metal oxide materials provide new functionalities, which by far exceed present semiconductor and IT technology. The project will enable new observations of materials’ behaviour by combining Superconducting Quantum Interference Device (SQUID) magnetometry with optical illumination, under systematically controlled conditions. The photomagnetic measurement system will cover a diverse process parameter space for studying magnetic materials properties under light illumination, enabling measurements of the smallest magnetisation signals possible so far, for example in ultrathin films and nanomaterials.Read moreRead less