Development of advanced ceramic membranes: a robust solution to sustainable water treatment. Australia is one of the driest nations on Earth. While available fresh water supplies dwindle, options to treat 'used' water for reuse are gaining rapid popularity. Membranes are now state-of-the-art for water treatment, including all new desalination plants, but as they are polymeric based, they must be routinely cleaned with chemicals and replaced. The outcomes of this research will demonstrate innovat ....Development of advanced ceramic membranes: a robust solution to sustainable water treatment. Australia is one of the driest nations on Earth. While available fresh water supplies dwindle, options to treat 'used' water for reuse are gaining rapid popularity. Membranes are now state-of-the-art for water treatment, including all new desalination plants, but as they are polymeric based, they must be routinely cleaned with chemicals and replaced. The outcomes of this research will demonstrate innovative functional ceramic membranes which last longer and have lower requirement for cleaning chemicals and expert maintenance. This, in turn, will deliver water at lower cost and reduced environmental burden (chemical and membrane disposal), giving industry more sustainable solutions to treat water, which has now become an essential practice in society.Read moreRead less
Transistor-based sensor technology for fast, reliable and accurate in situ monitoring of recycled wastewater. Water recycling is becoming critical for water supplies worldwide, due to declining natural supplies of fresh water, combined with increasing demand. The greatest community and industry concerns over recycled water are quality assurance and relative cost. Ensuring quality requires monitoring of contaminants, yet no single real-time technology exists to measure the myriad of potential con ....Transistor-based sensor technology for fast, reliable and accurate in situ monitoring of recycled wastewater. Water recycling is becoming critical for water supplies worldwide, due to declining natural supplies of fresh water, combined with increasing demand. The greatest community and industry concerns over recycled water are quality assurance and relative cost. Ensuring quality requires monitoring of contaminants, yet no single real-time technology exists to measure the myriad of potential contaminants. This project will develop technology using AlGaN/GaN-based transistors, sensitised to different contaminants, enabling multi-analyte real-time sensor arrays. In situ monitoring systems based on such arrays will be fast, accurate, reliable, low-cost, and applicable to a broad variety of water recycling projects.Read moreRead less
Hybrid photocatalytic nanomaterials for water purification. This project aims to synthesise and characterise a range of porous photocatalytic materials (materials that absorb light to catalyse a reaction), and to establish high-throughput processes to simultaneously test the effectiveness of multiple photocatalytic materials. This interdisciplinary project expects to develop two new techniques that will lead to faster materials optimisation of materials that breakdown organic pollutants in water ....Hybrid photocatalytic nanomaterials for water purification. This project aims to synthesise and characterise a range of porous photocatalytic materials (materials that absorb light to catalyse a reaction), and to establish high-throughput processes to simultaneously test the effectiveness of multiple photocatalytic materials. This interdisciplinary project expects to develop two new techniques that will lead to faster materials optimisation of materials that breakdown organic pollutants in water under light irradiation. The intended outcomes include the production of industrially relevant photocatalysts and building capability in Australia to decrease photocatalytic testing time and cost. This should provide significant benefits to industry and the environment, and have an impact on human health.Read moreRead less
High performance multifunctional hierarchical structured membrane for water processing. The water processing industry is one of the most important economic sectors in Australia, though water scarcity is an economic limiting growth factor. The project targets at developing the next generation water processing technology affordable to residential consumption and applications in the industry and agriculture.
Scalable and Applicable Nanostructured Adsorbents for Arsenic Removal with High Performance. Arsenic contamination in groundwater and drinking water affects over 100 million people worldwide and causes severe health problems. This project aims to use a recently patented technology to develop a new generation of adsorbents with controlled nanostructure and morphology for arsenic removal. The novel low-cost adsorbents are expected to have superior performance for the treatment of water containing ....Scalable and Applicable Nanostructured Adsorbents for Arsenic Removal with High Performance. Arsenic contamination in groundwater and drinking water affects over 100 million people worldwide and causes severe health problems. This project aims to use a recently patented technology to develop a new generation of adsorbents with controlled nanostructure and morphology for arsenic removal. The novel low-cost adsorbents are expected to have superior performance for the treatment of water containing arsenic at both high and low concentrations. The engineered products will be tested in high-throughput wastewater treatment in pharmaceutical factories and as a household drinking water treatment device. This project aims to bring economic and social benefits to Australian industry and improve the quality of life for people all over the world.Read moreRead less
Carbon nanotube fluidic channels for desalination - interplay of nanoscale confinement and electrostatics. Tiny tubes of carbon, ten thousand times smaller than human hair, allow water to pass through at extraordinary speed. This project aims to understand and improve their salt rejection properties using comprehensive experimental and theoretical approaches. This will provide the impetus and knowledge for developing advanced membranes for desalination
Electrically conductive elastomeric composites by nanomaterials. Electrically conductive elastomeric composites by nanomaterials. This project aims to develop electrically conductive, mechanically robust, cost-effective elastomeric composites, by exploring new processing methods and studying the synergy between graphene sheets and multi-walled carbon nanotubes. Composites will be design, research and manufactured to suit the fabrication of rolling-resistance sensors that detect early-stage malfu ....Electrically conductive elastomeric composites by nanomaterials. Electrically conductive elastomeric composites by nanomaterials. This project aims to develop electrically conductive, mechanically robust, cost-effective elastomeric composites, by exploring new processing methods and studying the synergy between graphene sheets and multi-walled carbon nanotubes. Composites will be design, research and manufactured to suit the fabrication of rolling-resistance sensors that detect early-stage malfunctioning idler rolls. This technology could prevent the breakage of conveyor belts which are essential to the mining, processing and transportation of loose bulk materials; and improve the design and manufacturing of flexible sensors.Read moreRead less
Low-density high-performance proppants for hydraulic fracturing process . Australia has vast resources of unconventional oil/gas, which require hydraulic fracturing to stimulate production. This project aims to develop advanced low-density high-performance proppants from industry waste for hydraulic fracturing. This will be achieved by selecting purer SiO2 raw material, carefully designing the porous structure, and fully understanding its relationship with strength and pack conductivity. Low-den ....Low-density high-performance proppants for hydraulic fracturing process . Australia has vast resources of unconventional oil/gas, which require hydraulic fracturing to stimulate production. This project aims to develop advanced low-density high-performance proppants from industry waste for hydraulic fracturing. This will be achieved by selecting purer SiO2 raw material, carefully designing the porous structure, and fully understanding its relationship with strength and pack conductivity. Low-density means no chemicals in proppant transportation and application. Successful development of such high-performance proppants will significantly increase Australia oil/gas exploration and production with an environmental acceptable technology, a leap forward for the oil/gas industry in Australia and the world.Read moreRead less
New-generation low-fouling coatings for membrane and metal surfaces for dairy processes. This project will create new coatings that provide high levels of resistance to membrane and metal surfaces fouling in the dairy industry. The project will enable the implementation of a family of readily applicable low-fouling membrane coatings that will significantly reduce operational costs.