Diseases caused by the pneumococcus represent the largest cause of vaccine preventable death in the world today, mainly pneumonia and meningitis. In 2011, 16 developing countries will introduce pneumococcal conjugate vaccines, none in east Asia. Lack of research has been a major barrier to their use in the region. We have established an international centre of excellence in the field and we seek support to extend the capacity of this group and to transfer the technology to Vietnam.
Impact Of DTP Schedules On The Immunogenicity Of 2 Doses Of 13v-PCV Followed By An Early Booster
Funder
National Health and Medical Research Council
Funding Amount
$2,651,687.00
Summary
This project aims to come up with a vaccination schedule to make pneumococcal vaccines more effective and affordable for Fiji and other developing countries. We will evaluate schedules involving a 2 dose primary series in early infancy with a booster at 9 months of age. We will compare the immune responses to 3 different primary series and 2 booster options. The results of this project will be used to provide advice, at global and country levels, regarding introduction of pneumococcal vaccines.
Use of Gas Expanded Liquids to Facilitate Process Intensification. The aim of this research is the utilisation of gas expanded liquids (GXLs) in technology platforms based on the principles of process intensification (PI). In order to facilitate the attainment of project objectives a comprehensive investigation of the fundamental properties of GXLs, and their interactions is proposed. A significant component of the programme is expected to be to use the knowledge obtained to facilitate the devel ....Use of Gas Expanded Liquids to Facilitate Process Intensification. The aim of this research is the utilisation of gas expanded liquids (GXLs) in technology platforms based on the principles of process intensification (PI). In order to facilitate the attainment of project objectives a comprehensive investigation of the fundamental properties of GXLs, and their interactions is proposed. A significant component of the programme is expected to be to use the knowledge obtained to facilitate the development of scale-up protocol for PI based methodologies, with particular emphasis on the production of biomaterials. GXLs technology is frontier technology with regard to the biomaterials sector.Read moreRead less
Industrial Transformation Research Hubs - Grant ID: IH130200025
Funder
Australian Research Council
Funding Amount
$2,181,756.00
Summary
ARC Research Hub for transforming waste directly in cost-effective green manufacturing. ARC Research Hub for transforming waste directly in cost-effective green manufacturing. This Research Hub aims to create a unique opportunity for completely different industries to come together, with a common goal of creating value from mixed plastic and glass waste in manufacturing. Starting with fundamental investigations of the transformation behaviour of waste materials under high temperature conditions, ....ARC Research Hub for transforming waste directly in cost-effective green manufacturing. ARC Research Hub for transforming waste directly in cost-effective green manufacturing. This Research Hub aims to create a unique opportunity for completely different industries to come together, with a common goal of creating value from mixed plastic and glass waste in manufacturing. Starting with fundamental investigations of the transformation behaviour of waste materials under high temperature conditions, the hub will focus on developing scalable solutions for its manufacturing partners towards reducing the consumption of primary resources while simultaneously diverting waste streams from landfill. Additionally, the potential of using such transformations to yield improved products such as wear-resistant grinding media and light-weight building materials will be investigated to enhance Australian manufacturing.Read moreRead less
Using immersive virtual reality to enhance students’ science visualisation. This project aims to investigate the potential of advanced visualisation technology, immersive virtual reality, as a collaborative learning environment to support students to explore their ideas and learn a core chemistry concept, molecular structures and functions. Incorporating both data analytics and qualitative video analysis, the project will establish a deep understanding of how students learn about the molecular w ....Using immersive virtual reality to enhance students’ science visualisation. This project aims to investigate the potential of advanced visualisation technology, immersive virtual reality, as a collaborative learning environment to support students to explore their ideas and learn a core chemistry concept, molecular structures and functions. Incorporating both data analytics and qualitative video analysis, the project will establish a deep understanding of how students learn about the molecular world within an immersive virtual reality environment in relation to the learners’ experience, chemistry content, visual representations, learning tasks, and design features. The project will recommend evidence-driven design considerations for learning resources development and further educational research with advanced technologies.Read moreRead less
The online future of Science and Engineering education: The essential elements of laboratory-based learning for remote-access implementation. Laboratory classes are a critical part of science and engineering degree programs, but there has been little research into what actually takes place within them. Remote laboratories, in which students control equipment via the internet, are one potential solution for accommodating rising numbers of students, but the interfaces must be developed to effectiv ....The online future of Science and Engineering education: The essential elements of laboratory-based learning for remote-access implementation. Laboratory classes are a critical part of science and engineering degree programs, but there has been little research into what actually takes place within them. Remote laboratories, in which students control equipment via the internet, are one potential solution for accommodating rising numbers of students, but the interfaces must be developed to effectively support student learning. This project will investigate how students interact with equipment, each other, and with laboratory demonstrators in order to determine the crucial components of effective laboratory learning experiences. It will identify and characterise the interactions of students in laboratory classes, and develop mechanisms to support these interactions remotely.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE180100042
Funder
Australian Research Council
Funding Amount
$621,834.00
Summary
Australian dark matter detector for high mass axions. This project aims to provide the necessary equipment to allow an Australian Dark Matter Axion Haloscope, with significantly increased sensitivity by providing a milliKelvin environment and a 14 T magnet to drive axion-to-photon conversions. Dark matter is a fundamental component of the universe yet the nature of its composition is still unknown. There is growing evidence that it is comprised of axions, a low energy, weakly interacting particl ....Australian dark matter detector for high mass axions. This project aims to provide the necessary equipment to allow an Australian Dark Matter Axion Haloscope, with significantly increased sensitivity by providing a milliKelvin environment and a 14 T magnet to drive axion-to-photon conversions. Dark matter is a fundamental component of the universe yet the nature of its composition is still unknown. There is growing evidence that it is comprised of axions, a low energy, weakly interacting particle. The precision measurement tools developed by this project will have the potential to contribute both to the economy, via commercialisation, and to national security, via future applications to radar, communication and the development of engineered quantum systems.Read moreRead less
ARC Centre of Excellence for the Digital Child. Our vision is for Australian children to be healthy, educated and connected. This Centre will integrate child health, education, and digital and social connectedness, innovating across disciplines to meet Australia’s ongoing challenges of supporting young children growing up in a rapidly changing digital age. The Centre’s world-leading team investigates children’s digital practices through three interconnected research programs supported by a longi ....ARC Centre of Excellence for the Digital Child. Our vision is for Australian children to be healthy, educated and connected. This Centre will integrate child health, education, and digital and social connectedness, innovating across disciplines to meet Australia’s ongoing challenges of supporting young children growing up in a rapidly changing digital age. The Centre’s world-leading team investigates children’s digital practices through three interconnected research programs supported by a longitudinal family cohort study and children’s technology laboratories. The Centre will address tensions in a contested field to inform government and non-government policy, technology innovation, and develop programs and guidelines for children, families, educators and technology developers. Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100174
Funder
Australian Research Council
Funding Amount
$425,000.00
Summary
X-Ray Nanolithography Facility: Towards the ultimate resolution. This Project aims to address the need for precise and scalable nanoscale fabrication by establishing a synchrotron-based X-Ray Nanolithography Facility. This Project expects to generate new knowledge in the areas of advanced manufacturing and nanotechnology using an innovative approach that combines coherent lithography and coherent imaging metrology. Expected outcomes of this project include an internationally unique, nationally ....X-Ray Nanolithography Facility: Towards the ultimate resolution. This Project aims to address the need for precise and scalable nanoscale fabrication by establishing a synchrotron-based X-Ray Nanolithography Facility. This Project expects to generate new knowledge in the areas of advanced manufacturing and nanotechnology using an innovative approach that combines coherent lithography and coherent imaging metrology. Expected outcomes of this project include an internationally unique, nationally accessible capability for manufacturing at the nanoscale and for industry-driven collaborative research. This should provide significant benefits across fields that aim to harness the unique properties of engineered nanomaterials to greatly enhance the technologies required to solve global challenges.Read moreRead less
Building Better Brands: A Study of Australian Organizations and Consumers. The study is the first to be undertaken in the world to develop a knowledge management system of brand development and management. It focuses on understanding how branding strategies increase the competitiveness of Australian industry. The study also explores linkages of branding strategy to consumer perceptions of brand value. The model is firmly placed in a global market context, contrasting domestic, exported and im ....Building Better Brands: A Study of Australian Organizations and Consumers. The study is the first to be undertaken in the world to develop a knowledge management system of brand development and management. It focuses on understanding how branding strategies increase the competitiveness of Australian industry. The study also explores linkages of branding strategy to consumer perceptions of brand value. The model is firmly placed in a global market context, contrasting domestic, exported and imported brands. The focus is strongly orientated toward improving Australia's competitiveness and global performance. This study is vital as the economic superiority of strong nations is evident in the value and strength of their industries' brands.Read moreRead less