Ecological regime shifts for re-engineering water pollution management. This project aims to validate a framework for the management of water pollution. As the world population increases, maintaining robust, cost-effective and environmentally safe water resources is important. This project will investigate environmental controls of toxin occurrence in urban and wastewater systems. The project is expected to mitigate deadly cyanotoxins, which threaten the safety of water resources, while a numeri ....Ecological regime shifts for re-engineering water pollution management. This project aims to validate a framework for the management of water pollution. As the world population increases, maintaining robust, cost-effective and environmentally safe water resources is important. This project will investigate environmental controls of toxin occurrence in urban and wastewater systems. The project is expected to mitigate deadly cyanotoxins, which threaten the safety of water resources, while a numerical ecological model will tackle water pollution issues in natural and engineered water systems.Read moreRead less
Understanding the role of vegetation in nitrogen removal by biofiltration. Many of Australia's bays and waterways are threatened by eutrophication due to excess nitrogen loads, particularly from urban stormwater. Biofiltration systems are a widely used (Melbourne Water alone has a programme of constructing 10000 systems in partnership with municipalities over the next 5 years) and potentially effective treatment, but their nitrogen removal is highly dependent on the type of vegetation used. Th ....Understanding the role of vegetation in nitrogen removal by biofiltration. Many of Australia's bays and waterways are threatened by eutrophication due to excess nitrogen loads, particularly from urban stormwater. Biofiltration systems are a widely used (Melbourne Water alone has a programme of constructing 10000 systems in partnership with municipalities over the next 5 years) and potentially effective treatment, but their nitrogen removal is highly dependent on the type of vegetation used. This project will improve the understanding of the role of vegetation in nitrogen retention by stormwater biofilters, and will thus provide important guidance on plant selection and design for biofiltration.Read moreRead less
Maximizing reservoir water quality security through the use of a Lake Diagnostic System (LDS) and a Controlled Lagrangian Drogue (CLD). It is proposed to build on recent advancements in limnological research and existing measurement technologies to develop the hardware, algorithms and software to form a unique real time reservoir water quality management system, driven by minimal measurement inputs. This will remove the reliance on extensive expensive reservoir monitoring, previously necessary ....Maximizing reservoir water quality security through the use of a Lake Diagnostic System (LDS) and a Controlled Lagrangian Drogue (CLD). It is proposed to build on recent advancements in limnological research and existing measurement technologies to develop the hardware, algorithms and software to form a unique real time reservoir water quality management system, driven by minimal measurement inputs. This will remove the reliance on extensive expensive reservoir monitoring, previously necessary to characterize the lake spatial variability and seasonality, for full 3D modelling. This project will deliver to industry: two measurement tools to simplify reservoir monitoring, the LDS and CLD; and software tools to manage real time data collection, provide decision support to reservoir managers and to enable ?on-demand? scenario predictions.Read moreRead less
The application of inverse methods for resolving velocity, density and mixing fields in lakes and estuaries. The two techniques to be developed and tested here will allow the measurement of the 3D density and velocity fields in lakes and estuaries using only simple instruments and with minimum lake obstruction. Coupled with a Real Time Management System, these techniques can be used to validate numerical models and to simulate scenarios, such as future flood events, which have the potential fo ....The application of inverse methods for resolving velocity, density and mixing fields in lakes and estuaries. The two techniques to be developed and tested here will allow the measurement of the 3D density and velocity fields in lakes and estuaries using only simple instruments and with minimum lake obstruction. Coupled with a Real Time Management System, these techniques can be used to validate numerical models and to simulate scenarios, such as future flood events, which have the potential for contamination of water quality. The output from these simulations is then used, again in real time, to evaluate the new Index of Sustainable Functionality of the water body. When augmented with the results from this research we would have a tool that would help manage lakes and reservoirs to optimize the water quality, while maintaining the supply.Read moreRead less
Optimal management of corrosion and odour problems in sewer systems. Pollutants in wastewater undergo complex changes in sewers, leading to the production and release of odorous and corrosive compounds. Despite major efforts and expenditure by water utilities to mitigate these problems, odorous emissions from sewers are still commonly occurring in urban areas. Furthermore, the value of public assets is significantly diminished due to sewer corrosion, costing hundreds of millions of dollars a yea ....Optimal management of corrosion and odour problems in sewer systems. Pollutants in wastewater undergo complex changes in sewers, leading to the production and release of odorous and corrosive compounds. Despite major efforts and expenditure by water utilities to mitigate these problems, odorous emissions from sewers are still commonly occurring in urban areas. Furthermore, the value of public assets is significantly diminished due to sewer corrosion, costing hundreds of millions of dollars a year in Australia alone. This project is a major joint effort by the Australian water industry and world-leading scientists to generate advanced knowledge and develop effective technologies for optimal odour and corrosion management in sewers, delivering large social, environmental and economic benefits.Read moreRead less
Understanding and mitigating nitrous oxide emission from wastewater treatment plants. Climate change caused by greenhouse gas emissions is one of the most serious challenges that mankind is facing. Substantial reduction in emissions must be achieved, with responsibility to be shared by all industrial sectors. Wastewater systems contribute to greenhouse gas emissions through not only energy consumptions but also direct emissions of fugitive greenhouse gases such as nitrous oxide. This project aim ....Understanding and mitigating nitrous oxide emission from wastewater treatment plants. Climate change caused by greenhouse gas emissions is one of the most serious challenges that mankind is facing. Substantial reduction in emissions must be achieved, with responsibility to be shared by all industrial sectors. Wastewater systems contribute to greenhouse gas emissions through not only energy consumptions but also direct emissions of fugitive greenhouse gases such as nitrous oxide. This project aims to provide knowledge and technology support to the Australian wastewater industry to minimize the emission of nitrous oxide during biological nitrogen removal from wastewater. This is critically important for this industry to achieve greenhouse gas neutral wastewater management.Read moreRead less
Sewer corrosion reduction through model-supported ventilation control. Ventilation is one of the key technologies for sewer corrosion control. However, its design and operation are currently based on experience and empirical equations, often leading to unsatisfactory results. By integrating in-depth laboratory and pilot-sewer studies under defined conditions with extensive field investigations, this multidisciplinary project aims to develop critical models to predict the corrosion process in res ....Sewer corrosion reduction through model-supported ventilation control. Ventilation is one of the key technologies for sewer corrosion control. However, its design and operation are currently based on experience and empirical equations, often leading to unsatisfactory results. By integrating in-depth laboratory and pilot-sewer studies under defined conditions with extensive field investigations, this multidisciplinary project aims to develop critical models to predict the corrosion process in response to ventilation and dynamic wastewater and atmospheric conditions, enabling model-based sewer ventilation design and operation. The project also aims to deliver novel, field-demonstrated ventilation strategies. The project findings will be incorporated in the Australian ventilation design and operation guidelines.Read moreRead less
Measurement of the spatial distribution of temperature and velocity in lakes using Acoustic Tomography. This project will investigate the use of acoustic tomography in lakes to continuously measure the lake-wide distribution of temperature and velocity. The challenges with lake acoustic tomography are the accuracy required in the travel time measurements over shorter distances, acoustic losses due to reflections and ensuring enough rays travel through the thermocline, the region of greatest inte ....Measurement of the spatial distribution of temperature and velocity in lakes using Acoustic Tomography. This project will investigate the use of acoustic tomography in lakes to continuously measure the lake-wide distribution of temperature and velocity. The challenges with lake acoustic tomography are the accuracy required in the travel time measurements over shorter distances, acoustic losses due to reflections and ensuring enough rays travel through the thermocline, the region of greatest interest in lakes. A pilot experiment in a deep lake will investigate the quality of travel time measurements computed from rays travelling through the thermocline of a strongly stratified lake. This has wide applications for the water quality management of lakes and reservoirs.Read moreRead less
Special Research Initiatives - Grant ID: SR180200015
Funder
Australian Research Council
Funding Amount
$589,007.00
Summary
Combination of electrochemistry with sono to destroy and detoxify PFAS. Previously the major means of dealing with per- and poly-fluoroalkyl substances (PFAS) is by adsorption, to collect and remove PFAS from contaminated sites. However, PFAS still exist, non-degraded and waiting for destruction. Targeting slurry waste from current remediation / adsorption plants, this project aims to efficiently degrade PFAS by combining electrochemical oxidation with sono-chemistry to enhance degradation capac ....Combination of electrochemistry with sono to destroy and detoxify PFAS. Previously the major means of dealing with per- and poly-fluoroalkyl substances (PFAS) is by adsorption, to collect and remove PFAS from contaminated sites. However, PFAS still exist, non-degraded and waiting for destruction. Targeting slurry waste from current remediation / adsorption plants, this project aims to efficiently degrade PFAS by combining electrochemical oxidation with sono-chemistry to enhance degradation capacity, to accelerate PFAS desorption / transportation from slurry waste, to avoid electrode fouling and to detoxify PFAS. The expected outcome of this project is to clean up contaminated sites, including PFAS / precursors and other persistent organic pollutants, leading to significant environmental benefits.Read moreRead less
Methane and nitrous oxide emissions from sewers – understanding, modelling and mitigation. The research and industry partners will collaborate on this project to quantify, understand and mitigate emissions of methane and nitrous oxide in sewer networks. Both methane and nitrous oxide are potent greenhouse gases, and their emissions need to be accounted for and mitigated for the water industry to achieve greenhouse neutral water services.