The Development of High Strength Aluminium and Magnesium Alloys Using "Edge-to-edge" Matching Model. The theoretical, crystallographic "edge-to-edge" matching model for diffusion-controlled phase transformations will be applied to the practical development of improved industrial aluminium and magnesium alloys with assistance of computer simulations. The model will be used to enhance the precipitation hardening response and to identify more effective grain refiners in these light alloys. The aim ....The Development of High Strength Aluminium and Magnesium Alloys Using "Edge-to-edge" Matching Model. The theoretical, crystallographic "edge-to-edge" matching model for diffusion-controlled phase transformations will be applied to the practical development of improved industrial aluminium and magnesium alloys with assistance of computer simulations. The model will be used to enhance the precipitation hardening response and to identify more effective grain refiners in these light alloys. The aims will be the development of one high strength aluminium alloy with good ductility and one high strength magnesium alloy with good creep resistance at elevated temperatures. A computer program that will help to identify the most effective grain refiners for specific light alloys will also be produced.Read moreRead less
Computer Modelling of the Morphology and Crystallography of Diffusion-controlled Phase Transformations. An analytical, phenomenological version of the successful "edge-to edge" matching approach to the morphology and crystallography of diffusion-controlled phase transformations will be developed. This will be incorporated in a Windows based computer program that can predict the essential features of precipitation (orientation relationships, habit planes, morphology and interface structure), fro ....Computer Modelling of the Morphology and Crystallography of Diffusion-controlled Phase Transformations. An analytical, phenomenological version of the successful "edge-to edge" matching approach to the morphology and crystallography of diffusion-controlled phase transformations will be developed. This will be incorporated in a Windows based computer program that can predict the essential features of precipitation (orientation relationships, habit planes, morphology and interface structure), from readily available input data for the two phases involved. It will provide a fuller understanding of diffusion-controlled phase transformations and the computer simulation will assist in the development of improved precipitation hardening alloys. In addition, a database of crystallographic data for typical metallic materials will be established in the project.Read moreRead less
Advanced computational techniques for micro/nano multiscale systems of NEMS/BioMEMS. The outcome of this project will have the following benefits to Australia.
1) It will improve the research level in the area of multiscale simulation of NEMS/BioMEMS;
2) The project will be beneficial to possibly establish new industries in the areas of nanotechnology as well as to make good use of today's microelectronics, mircofabrication and computer technology that have already established in Australia;
....Advanced computational techniques for micro/nano multiscale systems of NEMS/BioMEMS. The outcome of this project will have the following benefits to Australia.
1) It will improve the research level in the area of multiscale simulation of NEMS/BioMEMS;
2) The project will be beneficial to possibly establish new industries in the areas of nanotechnology as well as to make good use of today's microelectronics, mircofabrication and computer technology that have already established in Australia;
3) The manpower trained by this project in the areas of multi-scale simulation of MEMS/NEMS/BioMEMS will provide a crucial support for the future industry of Australia.
Read moreRead less
Modelling soft filled viscoelastic solids. Wheat flour doughs are made in vast quantities daily, and improvements in processing, especially in sheeting (rolling) and extrusion are needed. To enable this we will create a novel mathematical description of the material which will be useful for predicting the shapes of processed products. Wheat breeding cycles can be shortened by using the model rheological parameters, since baking quality is closely linked to dough rheology. A number of Australian ....Modelling soft filled viscoelastic solids. Wheat flour doughs are made in vast quantities daily, and improvements in processing, especially in sheeting (rolling) and extrusion are needed. To enable this we will create a novel mathematical description of the material which will be useful for predicting the shapes of processed products. Wheat breeding cycles can be shortened by using the model rheological parameters, since baking quality is closely linked to dough rheology. A number of Australian wheats will be considered and their rheologies will be compared.Read moreRead less
Reducing gas and ash corrosion in advanced power generation. Advanced power generation using new coal combustion technologies increases energy efficiency and makes carbon dioxide capture possible, but increases the corrosion problems. This project aims to determine the corrosion behaviour of chromia-scale forming iron- and nickel-base alloys in the presence of deposits (coal ashes and salts) under carbon dioxide rich gas atmospheres. The increased understanding of alloy behaviour in hot corrosiv ....Reducing gas and ash corrosion in advanced power generation. Advanced power generation using new coal combustion technologies increases energy efficiency and makes carbon dioxide capture possible, but increases the corrosion problems. This project aims to determine the corrosion behaviour of chromia-scale forming iron- and nickel-base alloys in the presence of deposits (coal ashes and salts) under carbon dioxide rich gas atmospheres. The increased understanding of alloy behaviour in hot corrosive ashes and gases, will permit more effective materials design and selection leading to more efficient and economic technologies for reliable and low cost carbon capture in energy production, waste-energy conversion and related industries.Read moreRead less
High temperature corrosion induced by multiple secondary oxidants . Heat resisting chromia-forming alloys passivate successfully in clean, dry air at temperatures up to about 950°C. However, this performance is degraded by secondary oxidants (carbon, sulphur, chlorine, water vapour), leading to corrosion failure in important industries. The project aims to investigate the effect of these secondary oxidants on corrosion behaviour of chromia-forming alloys, to identify interactions between multipl ....High temperature corrosion induced by multiple secondary oxidants . Heat resisting chromia-forming alloys passivate successfully in clean, dry air at temperatures up to about 950°C. However, this performance is degraded by secondary oxidants (carbon, sulphur, chlorine, water vapour), leading to corrosion failure in important industries. The project aims to investigate the effect of these secondary oxidants on corrosion behaviour of chromia-forming alloys, to identify interactions between multiple oxidants within the scale, to establish the mechanisms of oxide scale penetration by foreign species, and to evaluate scales on different alloy types. The results will provide a basis for improved design/selection of heat resisting chromia-forming alloys, key to power generation industries.Read moreRead less
Two-dimensional plasmonic heterogeneous nanostructures for photocatalysis. This project aims to design and explore two-dimensional heterogeneous photocatalysts that can convert solar energy into usable chemical energy. This project will investigate the correlation between surface plasmonic resonance and photocatalytic activities on the atomic level. Heterogeneous engineering and in-situ investigation of atomic-level photocatalytic dynamics is expected to yield several new full-solar-spectrum pho ....Two-dimensional plasmonic heterogeneous nanostructures for photocatalysis. This project aims to design and explore two-dimensional heterogeneous photocatalysts that can convert solar energy into usable chemical energy. This project will investigate the correlation between surface plasmonic resonance and photocatalytic activities on the atomic level. Heterogeneous engineering and in-situ investigation of atomic-level photocatalytic dynamics is expected to yield several new full-solar-spectrum photocatalysts. The project is expected to contribute to the understanding of the processes and mechanisms underlying photocatalysis, and lead to useable, stable and durable photocatalytics. The outcomes will enable efficient, cost-effective and reliable production of clean energy in a low-emission way.Read moreRead less
Heat-resisting iron-nickel base alloys in challenging new applications: oxygen permeabilities and resistance to internal oxidation. There is a pressing need to develop heat resisting alloys which can function adequately in higher operating temperatures and gas mixtures rich in carbon and hydrogen to be handled in advanced technologies for power generation. The expected outcomes of this project will provide the basis for design/selection of these more corrosion-resistant alloys.
Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by th ....Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by the optimization of materials and device design. The outcome will open up a new platform for the green and sustainable charge for portable microelectronics, which will lead to an innovative technology for energy management, which will place Australia at the forefront of wearable electronics and textile industry.Read moreRead less