SENSORS FOR AROMATIC MOLECULES BASED ON METAL ION ACTIVATED MOLECULAR RECEPTORS. This project aims to develop highly sensitive chemical sensors for aromatic compounds which will quantify their concentration, in situ, without elaborate sample preparation or instrumentation. The sensors will employ advanced supramolecular chemistry in which the aromatic molecule becomes trapped within a binding cavity in the three dimensional structure of a larger receptor molecule. Coincident with the entrapmen ....SENSORS FOR AROMATIC MOLECULES BASED ON METAL ION ACTIVATED MOLECULAR RECEPTORS. This project aims to develop highly sensitive chemical sensors for aromatic compounds which will quantify their concentration, in situ, without elaborate sample preparation or instrumentation. The sensors will employ advanced supramolecular chemistry in which the aromatic molecule becomes trapped within a binding cavity in the three dimensional structure of a larger receptor molecule. Coincident with the entrapment a change in the fluorescence level of the receptor occurs which signals the presence of the aromatic compound and its concentration. This research will stimulate economic and social benefits through the development of new environmental and medical sensing techniques and analytical diagnostics.Read moreRead less
Porous silicon biosensor for rapid detection of water-borne contaminants. We have recently demonstrated the rapid degradation of porous silicon by certain transition metal complexes known as biomimetic catalysts. The catalysed degradation forms the basis of a new sensor principle where the porous layer serves as matrix, transducer and signal amplification stage. Using this mechanism, we will develop a biosensor for the rapid detection of contaminants (toxins etc.) in water resources. Reservoir w ....Porous silicon biosensor for rapid detection of water-borne contaminants. We have recently demonstrated the rapid degradation of porous silicon by certain transition metal complexes known as biomimetic catalysts. The catalysed degradation forms the basis of a new sensor principle where the porous layer serves as matrix, transducer and signal amplification stage. Using this mechanism, we will develop a biosensor for the rapid detection of contaminants (toxins etc.) in water resources. Reservoir water treatment today is reactive rather than preventive because current analysis is slow. Our biosensor can be turned into a field kit to improve water quality management and prevent acts of deliberate sabotage to the water supply.Read moreRead less
Multifunctional mixed matrix membranes incorporating aligned carbon nanotubes. The pressure on water supplies in Australia will only increase in coming years meaning that effective and cheap means of recycling water must be found. By developing a carbon nanotube-based water filtration system, we intend to promote the growth of Australia's world-class reputation in water remediation. The technological outcomes from this research will lead to direct economic and environmental benefits for the comm ....Multifunctional mixed matrix membranes incorporating aligned carbon nanotubes. The pressure on water supplies in Australia will only increase in coming years meaning that effective and cheap means of recycling water must be found. By developing a carbon nanotube-based water filtration system, we intend to promote the growth of Australia's world-class reputation in water remediation. The technological outcomes from this research will lead to direct economic and environmental benefits for the community and offer commercial opportunities for industry. Training research scientists of the future forms an integral part of our program as it is crucial to maintain a critical mass in this potentially forthcoming water based economy.
Read moreRead less
Development of an interferometric nanoscale silicon biosensor. Voelcker et al. have recently demonstrated the rapid degradation of porous silicon by certain supramolecular transition metal complexes known as functional mimics of metalloproteins. The catalyzed degradation forms the basis of a new sensor principle where the porous layer serves as matrix, transducer and signal amplification stage. This project uses porous silicon degradation to develop a biosensor platform capable of detecting a ra ....Development of an interferometric nanoscale silicon biosensor. Voelcker et al. have recently demonstrated the rapid degradation of porous silicon by certain supramolecular transition metal complexes known as functional mimics of metalloproteins. The catalyzed degradation forms the basis of a new sensor principle where the porous layer serves as matrix, transducer and signal amplification stage. This project uses porous silicon degradation to develop a biosensor platform capable of detecting a range of analytes with high sensitivity. The project includes detection of an water-borne toxin, a plant virus and a cancer antigen as demonstrators of its wide applicability. Multiplexing of the biosensor to demonstrate its potential as high-throughput chip sensors is also included.Read moreRead less
A New Generic Approach for Assessing Blast Effects on Reinforced Concrete Members. A framework allow for both flexural and shear response analysis using a new segmental approach is developed in this proposal. A blast test program is designed to validate the framework for reinforced concrete members. The validated framework is then used to derive normalised pressure impulse programs for reinforced members in unconfined and confined spaces. This project will provide design engineers guidelines for ....A New Generic Approach for Assessing Blast Effects on Reinforced Concrete Members. A framework allow for both flexural and shear response analysis using a new segmental approach is developed in this proposal. A blast test program is designed to validate the framework for reinforced concrete members. The validated framework is then used to derive normalised pressure impulse programs for reinforced members in unconfined and confined spaces. This project will provide design engineers guidelines for reliably and quickly assessing the effect of different kinds of blast loads on different types and properties and geometries of reinforced concrete structural members, saving computation time and efforts while providing increased realism and accuracy.Read moreRead less
Cost Effective Pipeline Condition Assessment Using Paired Pressure Sensor Arrays. Water distribution networks represent society's most important infrastructure asset. They are buried pipes and are often old and deteriorating. Cost-effective methods to assess their physical condition are urgently needed. This research will develop a novel and advanced approach to determine the interior condition of pipes quickly and effectively using small water hammer pulses or waves. Paired pressure sensor arra ....Cost Effective Pipeline Condition Assessment Using Paired Pressure Sensor Arrays. Water distribution networks represent society's most important infrastructure asset. They are buried pipes and are often old and deteriorating. Cost-effective methods to assess their physical condition are urgently needed. This research will develop a novel and advanced approach to determine the interior condition of pipes quickly and effectively using small water hammer pulses or waves. Paired pressure sensor arrays will be used to measure reflections of the waves in pipes and these methods will enable finer resolution and identification of pipeline faults, such as wall thickness loss and leakage while at the same time allowing operational continuity. The outcome will be powerful tools to more cost effectively manage these crucial assets.Read moreRead less
High-resolution pipeline condition assessment using hydraulic transients. This project aims to develop urgently needed non-invasive methods to assess fine detail of a pipe’s condition and allow ‘just in time’ predictive repair. Water distribution networks are society's most important infrastructure asset. They consist of buried pipes that are often old and deteriorating, and annual maintenance overhead exceeds $1 billion per year in Australia alone. The project will develop cost-effective powerf ....High-resolution pipeline condition assessment using hydraulic transients. This project aims to develop urgently needed non-invasive methods to assess fine detail of a pipe’s condition and allow ‘just in time’ predictive repair. Water distribution networks are society's most important infrastructure asset. They consist of buried pipes that are often old and deteriorating, and annual maintenance overhead exceeds $1 billion per year in Australia alone. The project will develop cost-effective powerful tools to identify faults, such as pipe wall corrosion and blockages, while allowing operational continuity. The expected outcome is high-resolution images of wall condition of pipes using high-frequency pressure transients and sophisticated fibre optic sensor arrays.Read moreRead less
Reducing the Risk of Foundation Failures by Improving the Effectiveness of Geotechnical Investigations. Inadequate geotechnical site investigation is the major factor in construction overruns and delays. In some instances failure may occur. Alternatively, such investigation may result in over-designed foundations. This research will examine these issues through sites, based on numerical simulations of variable soil conditions and investigations. Case studies will be used to verify the modelling. ....Reducing the Risk of Foundation Failures by Improving the Effectiveness of Geotechnical Investigations. Inadequate geotechnical site investigation is the major factor in construction overruns and delays. In some instances failure may occur. Alternatively, such investigation may result in over-designed foundations. This research will examine these issues through sites, based on numerical simulations of variable soil conditions and investigations. Case studies will be used to verify the modelling. A practical framework for planning and implementing geotechnical investigations, based on the variability of the soil profile will be developed. A key aspect of this framework is that, for the first time, site investigations will be linked to risk of foundation failure and cost of overdesign.Read moreRead less
Fibre reinforced polymer retrofitting of reinforced concrete flexural members. A cost-effective and durable technique for retrofitting reinforced concrete beams and slabs is to adhesively bond new advanced fibre reinforced polymer (FRP) composites to their surfaces. The potential plating market in Australia for bridges is $350 million, however, the technique can also be applied to strengthening other structures such as buildings. Tests have shown that FRP plates or sheets can debond prematurely, ....Fibre reinforced polymer retrofitting of reinforced concrete flexural members. A cost-effective and durable technique for retrofitting reinforced concrete beams and slabs is to adhesively bond new advanced fibre reinforced polymer (FRP) composites to their surfaces. The potential plating market in Australia for bridges is $350 million, however, the technique can also be applied to strengthening other structures such as buildings. Tests have shown that FRP plates or sheets can debond prematurely, which at present severely limits the application. The aim of this research project is to quantify the debonding mechanisms, strengths and ductilities of adhesively bonded FRP plated beams to provide design rules that can be used in practice.Read moreRead less
Earthquake protection of masonry buildings using fibre reinforced polymer strengthening. The importance of this research is highlighted, both nationally and internationally, by the work of the insurance industry which reported that the economic risk posed by a moderate earthquake in any of the capital cities in Australia is of the order of billions of dollars (Blong, 1993). For example, a 'design magnitude' earthquake in Sydney is predicted to cause, just in domestic construction, over $10 bill ....Earthquake protection of masonry buildings using fibre reinforced polymer strengthening. The importance of this research is highlighted, both nationally and internationally, by the work of the insurance industry which reported that the economic risk posed by a moderate earthquake in any of the capital cities in Australia is of the order of billions of dollars (Blong, 1993). For example, a 'design magnitude' earthquake in Sydney is predicted to cause, just in domestic construction, over $10 billion damage and more than 5000 deaths. Most of this damage would be associated with unreinforced masonry construction such as low-rise apartment buildings. The damage bill for the entire built environment (with business interruption costs) could easily be an order of magnitude greater.Read moreRead less