Determination Of Irradiation Dose Efficacy For Use In Impaction Grafting At Revision Joint Replacement
Funder
National Health and Medical Research Council
Funding Amount
$411,517.00
Summary
Primary hip replacement is a successful intervention for hip disease, but 10-15% of hip prostheses fail and require revision surgery within 10-15 years. At the time of revision, significant bone loss around the failed prosthesis is not uncommon. A bone reconstruction procedure, called impaction grafting, where donor bone is minced and placed in the areas of deficient bone before implanting the new prosthesis, has shown to give good results at more than ten years in some centres. A high incidence ....Primary hip replacement is a successful intervention for hip disease, but 10-15% of hip prostheses fail and require revision surgery within 10-15 years. At the time of revision, significant bone loss around the failed prosthesis is not uncommon. A bone reconstruction procedure, called impaction grafting, where donor bone is minced and placed in the areas of deficient bone before implanting the new prosthesis, has shown to give good results at more than ten years in some centres. A high incidence of early complications of this procedure have included loss of fixation within the bone. Fracture of the bone around prostheses has also reported in some centres. These events require more surgery, putting the patient at higher risk greater complications and longer rehabilitations. Recent improvements in surgical technique and donor bone preparation have improved results. A current debate questions whether the dose of irradiation can be reduced from 25 kGy, while maintaining sterility of allografts. The risk of bacterial contamination in allografts is low, and irradiation reduces the mechanical strength of the graft, contributing to complications when irradiated bone is used. The benefits of decontaminating the bone may be outweighed by the higher risk for failure due to poor bone quality and resulting prosthesis instability. We will use ISO standards to test the validity of radiation dose for sterilising bone ex vivo. In the absence of controlled human studies, our aim is also to compare the results of impaction grafting with non-irradiated bone versus bone irradiated at current doses used by Australian bone banks, and lower doses indicated by ex vivo testing. We will use a large animal model of revision hip replacement, with precise measures of prosthesis stability. The results of this study will guide clinical decisions regarding the efficacy of current bone graft preparation procedures and the use of irradiated bone in human hip replacement surgery.Read moreRead less
Advancing the Thermal Insulation Performance of Australian Roofing Systems. To reduce the environmental impact of houses, state governments have mandated performance requirements on the energy efficiency of buildings. This research will develop advanced design techniques for the application of insulation in buildings, improving their performance. This will increase the effficiency of new buildings reducing Australia's greenhouse gas emissions. Furthermore, the peak power demand from residenti ....Advancing the Thermal Insulation Performance of Australian Roofing Systems. To reduce the environmental impact of houses, state governments have mandated performance requirements on the energy efficiency of buildings. This research will develop advanced design techniques for the application of insulation in buildings, improving their performance. This will increase the effficiency of new buildings reducing Australia's greenhouse gas emissions. Furthermore, the peak power demand from residential buildings will reduce, decreasing the need to upgrade our electrical infrastructure. The research will enable more cost effective insulation solutions to be developed in the building industry and increase employment in the insulation industry.Read moreRead less
Development of an active noise control system for sleeper seats on large commercial aircraft. Possible avenues will be investigated to actively reduce aircraft cabin noise experienced by passengers in sleeper seats, using localised active noise control (ANC). Previous work has focused on headsets and upright seat headrests which represent a different problem to the partially enclosed sleeper seats considered here. Efficiency and robustness problems that affect existing ANC systems will be addres ....Development of an active noise control system for sleeper seats on large commercial aircraft. Possible avenues will be investigated to actively reduce aircraft cabin noise experienced by passengers in sleeper seats, using localised active noise control (ANC). Previous work has focused on headsets and upright seat headrests which represent a different problem to the partially enclosed sleeper seats considered here. Efficiency and robustness problems that affect existing ANC systems will be addressed. A prototype system will be produced for a business class sleeper seat in a wide body aircraft. A second outcome is the establishment of a robust integrated system design procedure that can be used to quickly develop ANC systems for future designs.Read moreRead less
Hybrid cooling for coal fired power stations. Water shortage is a nation wide problem facing Australian industries. The project will directly benefit the Victorian power industry through water saving. If the new proposed hybrid cooling system concept is proved to be practically feasible, it will put the Australian power industry in a strong competitive position in terms of its efficiencies and waste heat recovery technology. Lowering the temperature of water into the cooling tower by 2 degree, b ....Hybrid cooling for coal fired power stations. Water shortage is a nation wide problem facing Australian industries. The project will directly benefit the Victorian power industry through water saving. If the new proposed hybrid cooling system concept is proved to be practically feasible, it will put the Australian power industry in a strong competitive position in terms of its efficiencies and waste heat recovery technology. Lowering the temperature of water into the cooling tower by 2 degree, by using the hybrid cooling system, it would save over 17,500,000 tons of makeup water per year for the Victorian power industry alone. At the same time, the waste heat recovered by the heat pump can be fed back to the power generation cycle. Read moreRead less
Better predictions of spray flames. This project aims to predict spray flames using experimental and computational modelling of the combustion near burning droplets in spray flames. Spray flames are the dominant source of energy for the transportation sector, and are expected to remain so well into the future. Limited understanding of combustion processes surrounding the burning of the droplets restricts further technological development. This project is expected to enable progress in design too ....Better predictions of spray flames. This project aims to predict spray flames using experimental and computational modelling of the combustion near burning droplets in spray flames. Spray flames are the dominant source of energy for the transportation sector, and are expected to remain so well into the future. Limited understanding of combustion processes surrounding the burning of the droplets restricts further technological development. This project is expected to enable progress in design tools for spray flame combustors operating on liquid fuels, including bio-fuels. The result will be lower pollutant emissions and lower the cost of design of new engines.Read moreRead less
Design of Tough, Durable and Corrosion-resistant Coatings. Coatings are frequently applied to components operating in harsh environments to enhance durability. Often such coatings exhibit low toughness and poor corrosion resistance that leads to premature failure. The aim of this project is to design, characterise and test innovative coatings that exhibit unique architectures based on natural materials such as teeth and nacre. It is envisaged that these coatings will be hard, tough and durable i ....Design of Tough, Durable and Corrosion-resistant Coatings. Coatings are frequently applied to components operating in harsh environments to enhance durability. Often such coatings exhibit low toughness and poor corrosion resistance that leads to premature failure. The aim of this project is to design, characterise and test innovative coatings that exhibit unique architectures based on natural materials such as teeth and nacre. It is envisaged that these coatings will be hard, tough and durable in hostile, corrosive environments, and will thus, transform industries such as manufacturing, mining and offshore oil exploration as well as enhance the lifetime of prosthetic devices.Read moreRead less
Novel vibro-acoustic technologies for detecting bearing and wheel defects in rail vehicles. Research will be conducted to provide the basis for the development of a novel automatic system that detects bearing and wheel defects in under-way railway wagons, thus helping to prevent catastrophic derailments and minimise fuel consumption. It will also maintain Australian industry at the forefront of the global track-side monitoring industry.
Development of novel roofing panels integrating solar heat collection and phase change storage. The provision of comfort heating for domestic and commercial buildings contributes significantly to Australia's energy use and greenhouse gas emissions. The project aims to develop a new roofing product which will collect and store solar energy for heating. The product integrates conventional roofing products into a solar collector and a heat store. Materials that melt/freeze at suitable temperatures ....Development of novel roofing panels integrating solar heat collection and phase change storage. The provision of comfort heating for domestic and commercial buildings contributes significantly to Australia's energy use and greenhouse gas emissions. The project aims to develop a new roofing product which will collect and store solar energy for heating. The product integrates conventional roofing products into a solar collector and a heat store. Materials that melt/freeze at suitable temperatures will be used for heat storage. The project involves developing a mathematical model and a prototype design. In addition to fulfilling the conventional function of roofing products including thermal and sound insulation, the prototype is intended to be aesthetically acceptable and easily compatible with current building practices.Read moreRead less
Quantifying the impact of wind farm noise on rural communities. This project is directed at quantifying the level and character of wind farm noise experienced by rural communities, to gain an understanding of the likelihood of the emitted sound causing the medical symptoms experienced by these communities. The outcome will be an accurate prediction model that covers infrasound, the audio range and modulation.
Noise control in aircraft and motor vehicles. The principal aim of this collaborative program between Australian and Japanese research teams is to tackle the complex issue of using active noise control systems focussing "zones of quiet" at passengers in aircraft and motor vehicles. The work has important implications for increased comfort of air travel and a safer environment for drivers of heavy vehicles. The outcomes will be the development of "smart skins" for application to aircraft and veh ....Noise control in aircraft and motor vehicles. The principal aim of this collaborative program between Australian and Japanese research teams is to tackle the complex issue of using active noise control systems focussing "zones of quiet" at passengers in aircraft and motor vehicles. The work has important implications for increased comfort of air travel and a safer environment for drivers of heavy vehicles. The outcomes will be the development of "smart skins" for application to aircraft and vehicle cabin interiors to actively control of interior noise. This will be achieved by combining the Japanese team's "structural wavenumber sensors" and the Adelaide team's "virtual microphones".Read moreRead less