High Performance Anode for Direct Ammonia Solid Oxide Fuel Cells. Solid oxygen fuel cells are a clean energy generation device with very high energy efficiency and if with hydrogen as fuel, the emission is zero. However, the utilisation of hydrogen is limited by on-board storage. Ammonia is a promising hydrogen carrier and can be directly fed to solid oxide fuel cells without fuel storage problem, and the products are just hydrogen and nitrogen. For direct ammonia solid oxide fuel cells, the key ....High Performance Anode for Direct Ammonia Solid Oxide Fuel Cells. Solid oxygen fuel cells are a clean energy generation device with very high energy efficiency and if with hydrogen as fuel, the emission is zero. However, the utilisation of hydrogen is limited by on-board storage. Ammonia is a promising hydrogen carrier and can be directly fed to solid oxide fuel cells without fuel storage problem, and the products are just hydrogen and nitrogen. For direct ammonia solid oxide fuel cells, the key challenge is the anode. This project aims to develop a high performance anode for direct ammonia solid oxide fuel cells with both high activity and high stability at low temperature (below 600 degree C), thus addressing a key issue to make the direct ammonia solid oxide fuel cells commercially viable.Read moreRead less
Composites for thermal expansion matched oxygen electrodes. This project aims to develop high performance composite oxygen electrodes by using both negative thermal expansion materials and electrolyte materials to tailor the thermal expansion and activities of the perovskite-based electrodes for use in reduced temperature solid oxide cells. Such composite electrodes will show highly matched thermal expansion with electrolyte without sacrificing high activity at reduced temperatures. This project ....Composites for thermal expansion matched oxygen electrodes. This project aims to develop high performance composite oxygen electrodes by using both negative thermal expansion materials and electrolyte materials to tailor the thermal expansion and activities of the perovskite-based electrodes for use in reduced temperature solid oxide cells. Such composite electrodes will show highly matched thermal expansion with electrolyte without sacrificing high activity at reduced temperatures. This project seeks to address an important practical issue in the operation of solid oxide power cells - thermal expansion compatibility, which causes poor efficiency outside a narrow temperature band.Read moreRead less
High Performance Monolithic Perovskite Photocapacitors. Monolithic perovskite photocapacitor (MPPC) consisted of integrated energy harvesting perovskite solar cell and energy storage supercapacitor through an internally shared electrode can deliver stable electricity by harnessing solar energy. The performance of MPPC is dependent of properties of the shared electrode materials. This project aims to synthesis carbon materials with tailored surface, electrical and structure properties that are re ....High Performance Monolithic Perovskite Photocapacitors. Monolithic perovskite photocapacitor (MPPC) consisted of integrated energy harvesting perovskite solar cell and energy storage supercapacitor through an internally shared electrode can deliver stable electricity by harnessing solar energy. The performance of MPPC is dependent of properties of the shared electrode materials. This project aims to synthesis carbon materials with tailored surface, electrical and structure properties that are required to make a highly functioning shared electrode in MPPC. The goal is to fabricate stable, high performance MPPC. Successful achievement of the outcomes will enable cost-effective, reliable, solar electricity, placing Australia at the forefront of exploiting photovoltaics technologies.Read moreRead less
Understanding dynamic interfaces in electrochemical systems. This project aims to develop nanoscale characterisation methods to understand dynamic processes in zinc-ion batteries and high temperature electrolysis systems under real working (in operando) conditions. This project expects to reveal critical solid-liquid and solid-gas interfacial processes in these two distinctly different electrochemical systems. The expected outcomes include improved understanding of electrochemical interfaces and ....Understanding dynamic interfaces in electrochemical systems. This project aims to develop nanoscale characterisation methods to understand dynamic processes in zinc-ion batteries and high temperature electrolysis systems under real working (in operando) conditions. This project expects to reveal critical solid-liquid and solid-gas interfacial processes in these two distinctly different electrochemical systems. The expected outcomes include improved understanding of electrochemical interfaces and improved tools and methods to observe nanoscale interfacial processes. This information can be used to underpin mechanistic models, which will facilitate new materials design. Read moreRead less
A Micro-Physiological System to Mimic Human Microbiome-Organ Interactions. This project aims to mimic gut microbiome-organ interactions by developing a microbial-gut coculture chip, which can reversibly interface with other organs-on-chips. This is achieved through the systematic integration of highly customisable biofabrication and microfluidic technologies. This project fills a critical technological gap in the availability of an animal-alternative system to investigate microbiome-host interac ....A Micro-Physiological System to Mimic Human Microbiome-Organ Interactions. This project aims to mimic gut microbiome-organ interactions by developing a microbial-gut coculture chip, which can reversibly interface with other organs-on-chips. This is achieved through the systematic integration of highly customisable biofabrication and microfluidic technologies. This project fills a critical technological gap in the availability of an animal-alternative system to investigate microbiome-host interactions, which will greatly complement existing meta-omics approaches. The deliverables include a proof-of-concept system validated for gut-liver axis as well as the creation of new knowledge and framework to assimilate design thinking and advanced manufacturing to elevate tissue engineering into physiology engineering. Read moreRead less
Controllable Synthesis of Defects in Catalysts for Electrocatalysis . This project aims to address the most critical issue of electrocatalysis: identification of active sites for carbon-based metal free catalysts (CMFCs). Through the development of new methodologies, this proposal will, for the first time, controllably synthesise the vacancy defects that are the major active sites for CMFCs. The expected outcomes from this project include in-depth understanding of the fundamentals of electrocata ....Controllable Synthesis of Defects in Catalysts for Electrocatalysis . This project aims to address the most critical issue of electrocatalysis: identification of active sites for carbon-based metal free catalysts (CMFCs). Through the development of new methodologies, this proposal will, for the first time, controllably synthesise the vacancy defects that are the major active sites for CMFCs. The expected outcomes from this project include in-depth understanding of the fundamentals of electrocatalysis: the reactivity of active sites and the catalytic performance with the number of active sites; which will not only significantly advance knowledge but also achieve breakthrough technologies that greatly benefit to the society and economy both for Australia and worldwide.Read moreRead less
Australian Laureate Fellowships - Grant ID: FL230100095
Funder
Australian Research Council
Funding Amount
$3,095,070.00
Summary
Materials Nanotectonics: Designing Conductive Inorganic Porous Materials. This project aims to develop the next generation of conductive porous materials through an integrated approach which combines inorganic synthesis with informatics. Using this approach, transition metals can be combined with nonmetals creating mesoporous materials with precise control of their internal space allowing the correlations between structure, composition, properties, and performance to be revealed. This project is ....Materials Nanotectonics: Designing Conductive Inorganic Porous Materials. This project aims to develop the next generation of conductive porous materials through an integrated approach which combines inorganic synthesis with informatics. Using this approach, transition metals can be combined with nonmetals creating mesoporous materials with precise control of their internal space allowing the correlations between structure, composition, properties, and performance to be revealed. This project is expected to generate new highly efficient electrocatalysts and energy conversion devices based on low-cost and earth-abundant transition metals. The project outcomes will position Australia at the forefront of research and development in advanced materials, smart catalysts, and renewable energy technologies.Read moreRead less
Australian Laureate Fellowships - Grant ID: FL160100089
Funder
Australian Research Council
Funding Amount
$2,600,796.00
Summary
In situ electron microscopy toward new materials and applications. In situ electron microscopy toward new materials and applications. This project aims to develop materials for structural and green energy applications, using spatially-resolved, dynamic in situ transmission electron microscopy to research fundamental mechanical, electrical, thermal, optical, optoelectronic and photovoltaic properties of diverse nanostructures. These techniques measure nanomaterial (one-dimensional nanotubes and n ....In situ electron microscopy toward new materials and applications. In situ electron microscopy toward new materials and applications. This project aims to develop materials for structural and green energy applications, using spatially-resolved, dynamic in situ transmission electron microscopy to research fundamental mechanical, electrical, thermal, optical, optoelectronic and photovoltaic properties of diverse nanostructures. These techniques measure nanomaterial (one-dimensional nanotubes and nanowires and two-dimensional graphene-like nanosheets) response to external stimuli, including mechanical, electrical, optical and thermal stimuli. Anticipated outcomes are new ultralight and superstrong structural composites and ‘green-energy’ nanomaterials, such as solar cells, touch panels, batteries, supercapacitors, field-effect transistors, light sensors and displays.Read moreRead less
Indoor Photovoltaics Enabled by Wide-Bandgap Perovskite Quantum Dots. This project aims to develop a high-efficiency indoor photovoltaic (PV) technology to provide reliable low-cost power in the multi-billion dollar “Internet of Things” (IoT) market. There are currently no devices that meet the requirements for maximum operating efficiency under indoor illumination. We propose to solve this problem by fabricating PV cells using colloidal perovskite quantum dots that offer class-leading stability ....Indoor Photovoltaics Enabled by Wide-Bandgap Perovskite Quantum Dots. This project aims to develop a high-efficiency indoor photovoltaic (PV) technology to provide reliable low-cost power in the multi-billion dollar “Internet of Things” (IoT) market. There are currently no devices that meet the requirements for maximum operating efficiency under indoor illumination. We propose to solve this problem by fabricating PV cells using colloidal perovskite quantum dots that offer class-leading stability and band gap tunability across the required range, enabled by quantum confinement. The outcome is the development of integrated self-powered IoT devices potentially impacting Advanced Manufacturing growth in Energy, Cyber Security, Food and Agribusiness, as all of these will ultimately rely on networked smart devices.Read moreRead less