A novel method to stabilise expansive soils by alkali-activation . This project aims to address durability and sustainability issues with traditional lime-based methods used to stabilize expansive soils by alternatively advancing an alkali-activation approach. It expects to generate new knowledge in using alkali-activation to suppress the swelling potential of expansive soils which have been deleterious to roads, pavements and overlying structures. Expected outcomes of this project include deve ....A novel method to stabilise expansive soils by alkali-activation . This project aims to address durability and sustainability issues with traditional lime-based methods used to stabilize expansive soils by alternatively advancing an alkali-activation approach. It expects to generate new knowledge in using alkali-activation to suppress the swelling potential of expansive soils which have been deleterious to roads, pavements and overlying structures. Expected outcomes of this project include development of a long-term durable treatment with reduced carbon footprint and use of waste materials. This should provide significant benefits commercially and critical insights to overcome expansive soils which cover approximately one-fifth of Australia’s surface area and six out of eight of its largest cities.Read moreRead less
Advancing the Engineering of Minipile Systems to Frontier Applications. This project aims to develop new knowledge on the performance of battered minipile systems used in a wide range of applications from solar panels to traffic signs. Minipiles provide concrete-free foundation systems, yet their behaviour under more complex loading such as wind, is yet to be fully understood. This project will examine the loading conditions experienced during installation and throughout service life. This will ....Advancing the Engineering of Minipile Systems to Frontier Applications. This project aims to develop new knowledge on the performance of battered minipile systems used in a wide range of applications from solar panels to traffic signs. Minipiles provide concrete-free foundation systems, yet their behaviour under more complex loading such as wind, is yet to be fully understood. This project will examine the loading conditions experienced during installation and throughout service life. This will include complex full-scale laboratory tests and advanced computer modelling to verify the performance against expected cyclic loading. New design approaches will be developed for this emerging foundation system, enabling more widespread adoption of this technology in the building and construction industry.Read moreRead less
Development of deep soil mixing technology utilising industrial by-products. This project will investigate the sustainable use of industrial wastes in ground improvement works using deep soil mixing. Currently, ground improvement projects use large amounts of highly carbon intensive materials. This project aims to develop low carbon alternatives by using geopolymers, which are a mixture of industrial waste by-products such as fly ash and slag with alkali activators. This project will explore the ....Development of deep soil mixing technology utilising industrial by-products. This project will investigate the sustainable use of industrial wastes in ground improvement works using deep soil mixing. Currently, ground improvement projects use large amounts of highly carbon intensive materials. This project aims to develop low carbon alternatives by using geopolymers, which are a mixture of industrial waste by-products such as fly ash and slag with alkali activators. This project will explore the consolidation effects and stress–strain responses of soft soil improved with geopolymers under static and dynamic loading. The main expected outcome of the project is an innovative ground improvement technique using geopolymers as an alternative green binder.Read moreRead less
Next generation transport infrastructure using high performance materials. This project aims to provide structural engineers with the tools required to develop ultra-high performance fibre reinforced concrete materials and to utilise their unique material properties in design. Recent feasibility studies have shown that the replacement of conventional concrete and steel transport infrastructure with ultra-high performance fibre reinforced concrete has the potential to revolutionise the sector. Fo ....Next generation transport infrastructure using high performance materials. This project aims to provide structural engineers with the tools required to develop ultra-high performance fibre reinforced concrete materials and to utilise their unique material properties in design. Recent feasibility studies have shown that the replacement of conventional concrete and steel transport infrastructure with ultra-high performance fibre reinforced concrete has the potential to revolutionise the sector. For these cost savings benefits to be realised, guidelines for the low cost development and testing of new materials, and for the application in structural design are required. This project is expected to deliver these guidelines and potentially maximise the impact of government spending on road and rail infrastructure.Read moreRead less
Geotechnical properties and compaction characteristics of granular wastes as potential port reclamation fill. In moving towards sustainable waste management, the Australian mining and steel industry is proactively seeking large scale recycling schemes for coal wash and slag. If the construction potential of these wastes is favourable for reclamation, then the environmental and socio-economic benefits will be substantial due to less quarrying of fresh rock and reduced volume of waste tips on oth ....Geotechnical properties and compaction characteristics of granular wastes as potential port reclamation fill. In moving towards sustainable waste management, the Australian mining and steel industry is proactively seeking large scale recycling schemes for coal wash and slag. If the construction potential of these wastes is favourable for reclamation, then the environmental and socio-economic benefits will be substantial due to less quarrying of fresh rock and reduced volume of waste tips on otherwise usable land. The research outcomes will be published in peer-reviewed journals and conferences, raising Australia's scientific profile in granular waste management. The geotechnical community will benefit through the rigorous training of professionals, while industry hosted seminars will promote the dissemination of knowledge gained to practitioners.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE150101512
Funder
Australian Research Council
Funding Amount
$360,000.00
Summary
Behaviour of novel FRP-timber composite thin-walled structural members. This project aims to investigate the structural behaviour of innovative hybrid Fibre Reinforced Polymer - Timber Composite (FRPTC) sections manufactured from small 'sawlog' timber. These FRPTC sections are made by taking advantage of the orthotropic material properties and, unlike sawn timber, these structures have efficient cross sectional shapes and can be made easily in different sizes to match the requirements. Even thou ....Behaviour of novel FRP-timber composite thin-walled structural members. This project aims to investigate the structural behaviour of innovative hybrid Fibre Reinforced Polymer - Timber Composite (FRPTC) sections manufactured from small 'sawlog' timber. These FRPTC sections are made by taking advantage of the orthotropic material properties and, unlike sawn timber, these structures have efficient cross sectional shapes and can be made easily in different sizes to match the requirements. Even though preliminary studies have shown promising results, behaviour of these FRPTC sections are not yet fully understood. This project aims to investigate the behaviour of these novel FRPTC sections and to develop numerical models to allow wide usage of these sections.Read moreRead less
Behaviour of novel FRP-timber ultralight thin-walled structural members. This project aims to investigate the structural behaviour of innovative hybrid fibre reinforced polymer–timber composite (FRPTC) thin-walled members which could be used as structural members in roof systems, façade systems, floor systems, etc. These FRPTC sections are made by taking advantage of the orthotropic material properties. Unlike sawn timber, these structures have efficient cross-sectional shapes and can be made ea ....Behaviour of novel FRP-timber ultralight thin-walled structural members. This project aims to investigate the structural behaviour of innovative hybrid fibre reinforced polymer–timber composite (FRPTC) thin-walled members which could be used as structural members in roof systems, façade systems, floor systems, etc. These FRPTC sections are made by taking advantage of the orthotropic material properties. Unlike sawn timber, these structures have efficient cross-sectional shapes and can be made easily in different sizes to match the requirements. Preliminary studies have shown promising results, however the behaviour of these novel FRPTC members is not yet fully understood. This project aims to investigate the behaviour of these novel FRPTC thin-walled members, specifically Cee-section members.Read moreRead less
Achieving structural morphing via functionalising nonlinear buckling. This project aims to develop a general framework to analyse and design functional components of buildings and structures, where they change shapes (morphing) by buckling. Australian buildings consume 20% of the nation’s total energy production on heating and cooling, and projected population increases are likely to increase energy demands. The shape changes are optimised, e.g. to reduce energy consumption by minimising solar r ....Achieving structural morphing via functionalising nonlinear buckling. This project aims to develop a general framework to analyse and design functional components of buildings and structures, where they change shapes (morphing) by buckling. Australian buildings consume 20% of the nation’s total energy production on heating and cooling, and projected population increases are likely to increase energy demands. The shape changes are optimised, e.g. to reduce energy consumption by minimising solar radiation loads or maximising natural air ventilation. The project expects to develop building technology solutions to reduce Australia's energy consumption, and provide domestic and global market opportunities in the high-tech manufacturing sector.Read moreRead less
Braced batter micropile group: New design theory and performance framework. Braced batter micropile group: New design theory and performance framework. This project aims to research the design and performance of innovative biomimetic braced battered micropile group footings. This project will test Surefoot, the new concrete free footing, in the laboratory, in the field, and through numerical and analytical modelling. Surefoot’s mechanisms of action are poorly understood but clearly more complex ....Braced batter micropile group: New design theory and performance framework. Braced batter micropile group: New design theory and performance framework. This project aims to research the design and performance of innovative biomimetic braced battered micropile group footings. This project will test Surefoot, the new concrete free footing, in the laboratory, in the field, and through numerical and analytical modelling. Surefoot’s mechanisms of action are poorly understood but clearly more complex than current micropile theory; this project will research the mechanism of load transfer from micropiles to the soil and soil response.Read moreRead less
Buckling capacity of high-strength steel flexural members. This project aims to investigate the capacity of high-strength steel (HSS) flexural members by undertaking physical tests and numerical simulations, and proposes to craft innovative overarching design guidance for them within a paradigm of Design by Advanced Analysis. HSS structures are significant as they are lighter than their mild steel counterparts and so use less material, with a much lower carbon footprint. Modern metallurgical pro ....Buckling capacity of high-strength steel flexural members. This project aims to investigate the capacity of high-strength steel (HSS) flexural members by undertaking physical tests and numerical simulations, and proposes to craft innovative overarching design guidance for them within a paradigm of Design by Advanced Analysis. HSS structures are significant as they are lighter than their mild steel counterparts and so use less material, with a much lower carbon footprint. Modern metallurgical process can produce HSS of Grade 1000 Megapascals or higher, but there is no specific structural code governing their design. Surprisingly little research has been reported on HSS flexural members which fail by lateral buckling, and this is the focus of the project, filling the gap needed to produce an advanced design standard.Read moreRead less